气动双位蝶阀详细介绍:
气动双位蝶阀是质量非常高的工业蝶阀。通过 EN 10204 3.1认证。
双断轴阀板,密封面球形设计,确保低扭矩,大流量,长寿命.
气动双位蝶阀主要由气动执行器和蝶阀组成,可根据需要选择电磁阀,限位开关,定位器(可输入4-20mA模拟量,实现阀门0-90°的任意角度调节)
ISO 5211 上法兰可直接安装执行器(气动执行器或电动执行器)
阀座硫化在硬靠背上,确保橡胶不变形。
多标准校正孔适合国标、美标、英标、日标多标准法兰:
DN40-DN300, PN10/16/ANSI150, BS10 TABLE D/E
DN350-DN600, PN10 or ANSI150, BS10 TABLE D/E.
*的缓冲坡阀座,实现中线蝶阀结构,偏心蝶阀效果,阀板与阀座之间无摩擦。
不锈钢或碳钢制成的耐用手柄。
3片式滑动轴承,减少摩擦,延长使用寿命。
气动双位蝶阀概括: 尺寸/压力: DN40 - DN300 = PN16 DN350 - DN600 = PN10 阀体表面: 聚酯纤维, RAL9006, 100μ 阀门结构长度: EN558-1 操作方式: 手柄、蜗轮箱、执行器(气动执行器, 电动执行器) 法兰标准: DN40-DN300, PN10/16/ANSI150 BS10 TABLE D/E, JIS 10K, 16K DN350 -DN600 PN10 、ANSI150 BS10 TABLE D/E
结构图及材质表:
对夹蝶阀扭矩表:
无头蝶阀尺寸图:
|
Summarize:
lISO 5211 mounting flanged enable direct mounting of actuators.
lMulti-standard alignment holes
DN40-DN300, PN10/16/ANSI150, BS10 TABLE D/E
DN350-DN600, PN10 or ANSI150, BS10 TABLE D/E
l3-piece plain bearing reduce friction and prolongs service life.
l2-piece stem resulting in low Kv-value and less turbulence.
lSeat vulcanized to a phenolic back-up ring making the valve ideal for vacuum applications.
lUnique plain bearing in the disc which ensures low torque, low friction, long service life and tightness(DN40-DN300).
lStrong handle in steel or stainless steel.
lSpecial designed seat which reduces torque and prolongs service life.
Specific information:
Type | Wafer | Lug | Double Flanged | |
Fig | FP101 | FP106 | FP102 | |
Picture |
|
|
| |
Dimensions | DN50 to DN1400 | DN50 to DN1400 | DN50 to DN1500 | |
Design | GB/T12238 | GB/T12238 | GB/T12238/ISO 5752 | |
Face to Face | GB/T12221 | GB/T12221 | GB/T12221 | |
Inspection & Testing | GB/T13927 | GB/T13927 | GB/T13927 | |
Other design standard and face to face, please contact FLO | ||||
Flange Standard | DN50(2”) to DN300(12”) | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 JIS B 2239 10K,16K BS 10 Table D, Table E | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement |
DN350(14”) To DN600(24”) | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 JIS B 2239 10K,16K BS 10 Table D, Table E | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | |
DN600 (24”) Above | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | EN1092 PN10,PN16 ASME B16.1 CLASS125 ASME B16.5 CLASS150 Other standards depend on requirement | |
Standard differential pressure | 2” to 24” | 16 Bar (230psi) | 16 Bar (230psi) | 16 Bar (230psi) |
24” Above | 10 Bar (145psi) | 10 Bar (145psi) | 10 Bar (145psi) | |
Maximum differential pressure | 2” to 24” | 20 Bar (285psi) | 20 Bar (285psi) | 20 Bar (285psi) |
24” Above | 16 Bar (230psi) | 16 Bar (230psi) | 16 Bar (230psi) | |
Working Temperature | -35°C~200°C (Depends on seal) | -35°C~200°C (Depends on seal) | -35°C~200°C (Depends on seal) | -35°C~200°C (Depends on seal) |