ADSS光缆用于高压输电线路并利用电力系统输电塔杆,整个光缆为非金属介质,自承悬挂于电力铁塔上电力强度zui小的位 置。它适用于已建高压输电线路,具有安全性高,无电磁/强电干扰,跨距大,深受广大电力系统用户的青睐。湖南ADSS光缆价格ADSS-16B1-600M-PE ADSS-12B1 ADSS参数在电力系统城网改 造、农网改造的通信建设中得到广泛的应用。 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
湖南ADSS光缆价格ADSS-16B1-600M-PE ADSS-12B1 ADSS参数
·产品特点 Characteristics
·可不断电架设
· Can be installed without shutting off the power
·采用AT护套,耐电痕性能*
· Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach
25kV
·重量轻、缆径小,减少了冰凌、风力影响和对塔架、支撑物的负荷
· Light weight and small diameter reducing the load caused by ice and wind and the load on towers
and backprops
·跨距大,zui大跨距超过1000m
· Large span lengths and the largest span is over 1000m
·具有优异的抗拉性能和温度特性 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
· Good performance of tensile strength and temperature
·预期寿命可达30年
· The design life span is 30 years
ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
·产品应用 Application
ADSS光缆的设计充分考虑了电力线路的实际情况,适用于不同等级高压输电线路。对于10kV和35kV的电力线路可采用聚乙烯(PE)护套;对于110kV和220kV的电力线路则必须通过计算电场场强分布来确定光缆挂点并采用耐电痕(AT)外护套。 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT同时,精心设计芳纶的用量和完善的绞合工艺以满足不同跨距的应用要求。
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans。
ADSS光缆|OPGW光缆|ADSS非金属自承式光缆|OPGW电力光缆|光缆企业|光纤公司|光纤光缆|室外光缆|非金属光缆|ADSS光缆|OPGW光缆|多模光
ADSS光缆|OPGW光缆|ADSS非金属自承式光缆|OPGW电力光缆|光缆企业|光纤公司|光纤光缆|室外光缆|非金属光缆|ADSS光缆|OPGW光缆