以色列OPHIR水冷系列热电堆功率计探头100K-W
波长范围：0.8-C1.1µm（b）
探头直径：Φ200
产品名称：以色列OPHIR水冷系列热电堆功率计探头100K-W
产品型号：100K-W
产品品牌：以色列OPHIR
OPHIR一级代理激光功率计探头100K-W
Use：Measuring Highest powers to 100kW
Measurement Type：Water cooled beam absorber chamber with defecting cone. Separate power measuring unit monitoring input and output cooling water fow and temperature
波长范围：0.8-C1.1μm(b)
探头直径：Φ200
Power Range for Calibrated Reading：10kW -C 100kW
Power Noise Level：±20W with stable water temperature
Backscattered Power：Less than 1%
Limitations on Beam：Designed for near Gaussian beam. Beam to be focused with 500 - 1000mm FL lens and meter placed so that the 1/e2 beam diameter on reflecting cone is Φ100mm in diameter (see sketch above)
Beam Centering Requirements：Beam to be centered on defecting cone ±5mm and parallel ±2degrees
Response Time：40s at flow rate 50 liter/min and 60s at flow rate 20 liter/min
Power Accuracy +/-%：5(a)
Cooling Requirements：Water flow rate, 50 liters/min at max power. Inlet temperature 15-20degC. Inlet water temperature rate of change <0.3degC/min at full power, proportionay less at lower power(b)
Minimum Water Flow Rate at Full Power：25 liter/min
Water Pressure Drop across Beam Absorber：3 bar at 50 liter/min flow rate
Water Connections：Up to 4 meters in each direction of 1’’OD 13/16’’ ID flexible nylon tubing
Outputs：1. Cable terminated in DB15 Ophir smart plug reading power
2. Cable terminated in DB9 plug with RS232 ASCII output reading power, flow rate and See drawing below
Weight kg：Beam Absorber 50kg. Power measuring unit 10kg
Part number：Consult Ophir representative
罗：
