直销光缆GYTA53直埋光缆8芯直埋光缆价格
产品描述 Description
GYTA53直埋光缆的结构是将250μm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根金属加强芯，对于某些芯数的光缆来说，金属加强芯外还需挤上一层聚乙烯（PE）。松套管（和填充绳）围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带（APL）纵包后挤一层聚乙烯内护套，双面涂塑钢带（PSP）纵包后挤制聚乙烯护套成缆。
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
产品特点Characteristics
l 具有很好的机械性能和温度特性
Good mechanical and temperature performance
l 松套管材料本身具有良好的耐水解性能和较高的强度
High strength loose tube that is hydrolysis resistant
l 管内充以特种油膏，对光纤进行了关键性保护
Special tube filling compound ensure a critical protection of fiber
l 良好的抗压性和柔软性
Crush resistance and flexibility
l 采用下列措施来确保光缆的防水性能：
The following measures are taken to ensure the cable watertight:
光纤光缆gyfta53-8b1室外光缆价格
产品描述 GYTA53光缆的结构是将单模或多模光纤套入由高模量的聚脂材料做成的松套管中, 套管内填充防水化合物.松套管的两侧放置两根平行钢丝后聚乙烯护套成缆. 产品特点 1. 精确控制光纤的余长,保证光缆具有良好的机械抗拉性能和环境温度特性. 2. 松套管材料本身具有良好的耐水解性能和较好强度,松套管内填充纤膏,对光纤进行了关键性的保护. 3. 两根平行钢丝保证了光缆的抗拉强度. 4. PE中密度护套具有良好的机械抗拉性,耐候性,耐磨性和较优的耐环境应力开裂性. 5. 直径小,重量轻.施工方便,性价比优良.GYTA53直埋光缆的结构GYTA53直埋光缆的结构GYTA53室外光缆价格架空光缆采用中心束管或层绞式铠装结构，光缆具有优良的柔韧性和抗弯曲能力。合理的设计和精确的余长控制使光缆具有优良的机械性能和环境性能。具有较强的防水性能。光缆外护套可根据用户要求采用无卤阻燃聚乙烯护套料，阻燃效果好、且无毒、无污染。也可采用尼龙护套料，使光缆具有优良的防白蚁破坏的能力
