本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
德国ADwin
该公司耶格尔Computergesteuerte测量技术有限公司开发的客户软件进行快速和动态试验台和生产设施。该ADWIN硬件可用自1989年以来。该公司总部设在城市的洛尔施设在法兰克福/ Main和曼海姆之间的莱茵河谷。
五十高素质的员工致力于为您提供：
耶格尔员工测量技术销售，和项目部为客户提供专业和具体的支持实现与应用ADWIN
我们ADWIN系统的增强.如今，该公司耶格尔测量技术有限公司和ADWIN站 - 主要是在汽车行业 - 快速测量数据采集与极快的响应时间。在我们的客户是众多企业。
深圳市普索进出口贸易有限公司
：王
：
：
：
型号列表
ADwin-Gold
ADwin-GoldII
ADwin-Pro
ADwin-ProII
ADwin-light-16
HSM-24V
ADbasic
TiCoBasic
ADtools
ADsim
ADlog
ADwinDriver
ADwinWeb Interface
ADwinand PLC
ADwinand Linux
ADwinServices
ADbasicTraining
ADwin-GoldII
GoldII-CNT 4x 32-bit up/down counters (RS422), 4-edge evaluation,
clock/direction,simultaneous period width measurement
4xSSI decoders, 6x PWM outputs
GoldII-CAN 2x CAN-Bus, 2x RS232/485
GoldII-CAN-LS 2x CAN-Bus (Low-Speed), 2x RS232/485
Gold II-DA4 Option: 4 analog outputs, 16-bit DAC(3μs)
Gold II-DA8 Option: 8 analog outputs, 16-bit DAC(3μs)
GoldII-Boot Bootloader option, for Ethernet, for stand-alone operation without PC
EEPROMparameter memory, fetch / write support for S7 SPS
GoldII-Storage-16 Memory card 16 GB flash memory, real-time clock
GoldII-Profibus 1x Profibus-DP Slave interface, 9pin D-SUB socket
GoldII-DeviceNet 1x DeviceNet slave interface, 5pin DeviceNet screw-type connector
GoldII-EtherCat 1x EtherCat slave interface, RJ45 connector
ADwin-Gold
Systemfeatures ADwin-Gold :
1processor ADSP21062, 32-bit, 40MHz, 256KB int./16MB ext. RAM,
1xevent input
16analog inputs ± 10V multiplexed to 2x 16-bit ADC (5μs),
2x14-bit ADC (0.5μs), 2 analog outputs ± 10V 16-bit DAC (3μs),
16digital inputs, 16 digital outputs,
supplyvoltage range 10-35V
ADwin-Gold-ENETADwin-Gold with Ethernet interface (10/100 MBit/s)
BNCsockets for analog signals
ADwin-Gold-D-ENETADwin-Gold with Ethernet interface (10/100 MBit/s)
D-SUBsockets for analog signals
ADwin-Gold-USBADwin-Gold with USB interface
BNCsockets for analog signals
ADwin-Gold-D-USBADwin-Gold with USB interface
D-SUBsockets for analog signals
ADwin-GoldOptions (Options for the standard system, later upgrading is not possible)
Gold-CO14x 32-bit up/down counter (RS422), 4-edge evaluation,
clock/direction,period width measurement
Gold-CANOption for ADwin-Gold-D : 2x CAN-Bus, 2x RS232/485,
4xSSI decoder
Gold-CAN-LSOption for ADwin-Gold-D : 2x CAN-Bus Low-Speed, 2x RS232/485,
4x SSIdecoder
Gold-DAOption: 6 additional analog outputs, 16-bit DAC (3μs)
Gold-BootBootloader option, for Ethernet, for stand-alone operation without PC
EEPROMparameter memory, fetch / write support for S7 SPS
Gold-MEM64Memory expansion from 16MB ext. memory to 64MB and
memoryexpansion from 256KB int. memory to 512KB
ADwin-light-16
Systemfeatures ADwin-L16:
1processor ADSP21062, 32-bit, 40MHz, 256KB / 16MB RAM, 1x event input,
8analog inputs ± 10V multiplexed to 16-bit ADC (2μs),
2 analog outputs ± 10V 16-bit DAC (3μs),
6 (4) digital inputs, 6 digital outputs,
2x32-bit impulse counters (TTL), 1x LS-Bus
ADwin-L16-PCIADwin-L16 as PC plug-in board 1 Slot
USBinterface to the PC
ADwin-L16-EXTADwin-L16 in an external industrial enclosure (226x109x44 mm)
USBinterface to the PC, supply voltage range 10-35V
ADwin-L16-EXT-ENETADwin-L16 in an external industrial enclosure (226x109x74 mm)
Ethernetinterface (10/100 MBit/s) to the PC, supply voltage range 10-35V
ADwin-L16-EUROADwin-L16 as Euro-size board 5 TE
USBinterface to the PC
ADwin-L16-EURO-ENETADwin-L16 as Euro-size board 10 TE
Ethernetinterface (10/100 MBit/s) to the PC
ADwin-light-16Options (Options for the standard system, later upgrading is not possible)
L16-DIO11x CAN-Bus, 32 TTL-I/Os configurable in groups of 8,
2x32-bit up/down counter (RS422), period width measurement,
1xSSI decoder
L16-DIO1-LS1x CAN-Bus Low-Speed, 32 TTL-I/Os configurable in groups of 8,
2x32-bit up/down counter (RS422), period width measurement,
1xSSI decoder
L16-DIO232 TTL-I/Os configurable in groups of 8,
2x32-bit up/down counter (1x TTL, 1x RS422), period width measurement,
1xSSI decoder
L16-DIO332 TTL-I/Os configurable in groups of 8
L16-PWM11x PWM output, 1x SPI master
L16-CO11x 32-bit up/down counter (TTL), 4-edge evaluation instead of
2x32-bit impulse counters (TTL), (not with L16-DIO1, L16-DIO2 options)
L16-MEM512kMemory expansion from 256KB int. memory to 512KB
L16-BootBootloader option for Ethernet, for stand-alone operation without PC
EEPROMparameter memory, fetch / write support for S7 SPS
Processors+ Options (Options, later upgrading is not possible)
Pro-CPU-T11-ENET 1 Prozessor ADSP, 32-bit, 300MHz,768KB int./256MB ext. RAM, 1x event input,
1Ethernet interface (10/100MBit/s) for communication with the PC
Pro-BootBootloader option, for Ethernet, for stand-alone operation without PC
EEPROMparameter memory, fetch / write support for S7 SPS
Enclosures
ADwin-Pro?? 19“ enclosure (84 HP, 3U), AC power supply 115/230V
14-16slots, desktop unit, all modules mounted from the frontside
ADwin-ProII-BM 19“ enclosure (84HP, 3U), AC power supply 115/230V
13-15slots, desktop unit, all modules mounted from the backside
ADwin-ProII-DC 19“ enclosure (84HP, 3U), DC-DC converter 10-35V
14-16slots, desktop unit, all modules mounted from the frontside
ADwin-ProII-light ½ 19“ enclosure (42HP , 3U), AC power supply 115/230V
7slots, desktop unit, all modules mounted from the frontside
ADwin-ProII-light-
DC
½ 19“enclosure(42HP, 3U), DC-DC converter 10-35V
7slots, desktop unit, all modules mounted from the frontside
ADwin-ProII-mini Enclosure (25HP, 3U), DC-DC converter 10-35V
4-5slots, desktop unit, all modules mounted from the frontside
Jäger
AnalogInputs with Multiplexer
ProII-AIn-32/18-D 32 SE or 16 diff. analog inputs ±10V, isolated by optocouples
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub
ProII-AIn-32/18-DTiCo
32SE or 16 diff. analog inputs ±10V, isolated by optocouples, TiCo ,
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub
Pro II-AIn-8/18 8 analog inputs ± 10V
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, LEMO-1pin
Pro II-AIn-8/18-D 8 analog inputs ± 10V
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub
ProII-AIn-8/18-8B 16 analog inputs (8x 8B signal conditioning)
18-bitADC (2μs), block measurement, limit monitoring, DSub, 15HP
ProII-AIn-16/18-8B 16 analog inputs (16x 8B signal conditioning)
18-bitADC (2μs), block measurement, limit monitoring, DSub, 15HP
ProII-AIn-16/18-C 16 diff. current inputs 0..20mA, 500 W Shunt (0.05%, TK10),
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub
AnalogInputs with Multiplexer, with Filter, ±10V / ±30V
ProII-AIn-8/18-
LP5
8analog inputs, cut-off frequency 5kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±10V, LEMO-1pin, 10HP
ProII-AIn-8/18-
LP5-D
8analog inputs, cut-off frequency 5kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±10V, Dsub, 10HP
ProII-AIn-8/18-
LP50-TiCo
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±10V, LEMO-1pin, 10HP, TiCo
ProII-AIn-8/18-
LP50-D-TiCo
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±10V, Dsub, 10HP, TiCo
ProII-AIn-8/18-
LP-30V
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±30V, LEMO-1pin, 10HP
ProII-AIn-8/18-
LP-30V-D
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±30V, DSub, 10HP
ProII-AIn-8/18-
LP-30V-TiCo
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring
measurementrange ±30V, LEMO-1pin, 10HP, TiCo
ProII-AIn-8/18-
LP-30V-D-TiCo
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
18-bitADC (2μs), MUX 2μs, block measurement, limit
ProII-AIn-F-4/16 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, LEMO-1pin
ProII-AIn-F-4/16-D 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, DSub
ProII-AIn-F-4/16-B 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, BNC
ProII-AIn-F-4/16-L2 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, LEMO-2pin
ProII-AIn-F-8/16 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, LEMO-1pin
ProII-AIn-F-8/16-D 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, DSub
ProII-AIn-F-8/16-B 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, BNC, 10HP
ProII-AIn-F-8/16-L2 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM
averaging,min-/max, limit monitoring, LEMO-2pin
AnalogInputs, Parallel Acquisition, 16-bit, with Filter, ±10V / ±30V
ProII-AIn-F-8/16-
LP50
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±10V, LEMO-1pin, 10HP
ProII-AIn-F-8/16-
LP50-D
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±10V, DSub, 10HP
ProII-AIn-F-8/16-
LP50-B
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±10V, BNC, 10HP
ProII-AIn-F-8/16-
LP50-L2
8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±10V, LEMO-2pin, 10HP
ProII-AIn-F-8/16-
LP-30V
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±30V, LEMO-1pin, 10HP
ProII-AIn-F-8/16-
LP-30V-D
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±30V, DSub, 10HP
ProII-AIn-F-8/16-
LP-30V-B
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM
measurementrange ±30V, BNC, 10HP
ProII-AIn-F-8/16-
LP-30V-L2
8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth
8x16-bit ADC (250ns), averaging, min-/max, limi
