PRODUCTS INDEX: POSITION SENSORS Inductive Sensors Metalface Inductive Sensors Capacitive Sensors Photoelectric Sensors Fiber Optic Sensors Magnetic Reed Sensors and Magnets Ultrasonic Sensors Magnetic Sensors for Cylinders LEVEL CONTROLS Capacitive Level Controls Conductivity Level Controls Rotative Level Controls Membrane Level Controls Magnetic Float Level Controls Protective Case for Capacitive Sensors Capacitive Sensors -200°C/+250°C ATEX-IECEx PRODUCTS Namur Inductive Sensors 1-2-3 G/D Inductive Sensors 3D Capacitive Sensors 3D Magnetic Reed Sensors 1-2-3 G/D Sensors for Rotation Control 3D Rotative Level Controls 1-2D Intrinsic Safety Atex Barriers OTHER PRODUCTS Amplifiers for Sensors Rotation Control-Shaft Stand Still Sequence Timers Proxy Tester Reflectors Connectors | POSITION SENSORS INDUCTIVE SENSORS |  |
| These are electronic transducers which generate an output signal when a metallic object (iron, aluminium, copper, brass)
enters into their sensing area from any directions whithout coming into contact.
Available in the cylindrical, rectangular and ring version and different electrical and mechanical features. All types available with cable or plug for connector.
| METALFACE INDUCTIVE SENSORS |  |
| These sensors are made entirely of AISI 316L stainless steel including also the sensitive part. Cylindrical threaded models M12-18-30 with IP68 and IP69K grade protection. The operating distance is 3-5-10mm in the shielded version. Amplified models with NPN or PNP outputs. The supply voltage is 10-30Vdc.
They are mainly used in harsh environments such as in the food and pharmaceutical industries where they can withstand frequent washing with high pressure water or on machines for metalworking. They are resistant to shock and vibrations and mechanically resistant to impacts on the active surface. | CAPACITIVE SENSORS |  |
|
These are electronic transducers which generate an output signal when any type of material (wood, metal, plastic, granular and powder products) enters their sensing area without coming into direct contact.
Available in the threaded cylindrical version with fixing brackets suitable for all different mechanical and electrical features. Types with instantaneous intervention or timing up to 15 min. are also supplied. Available in the cable or connector output version.
| PHOTOELECTRIC SENSORS |  |
| Photoelectric sensors are light emission principle electronic transducers. They provide an output signal when an object comes into their sensing area. They are available in the cylindrical M18, square, fork and M18 fibre optic versions.
They come in the direct and polarized reflection, with reflector for infrared light or polarized red light, barrier with emitter and receiver versions.
All versions are provided with cable or M12 connection. | FIBER OPTIC SENSORS |  |
| These sensors work electronically like any other photoelectric sensor, with the difference that the light emitted and received is transported by a fiber optic, which has a very small and variably shaped end and can be installed at a distance from the electronic measurement circuit or amplifier, made in stainless steel cylindrical housing AISI 303 M18X1 with fixing brackets. Different models are available according to the type of application. They can be 2 mt. standard and are covered by polyethylene and have either a smooth metallic end of 3mm. dia. or threaded M4-M5-M6. | MAGNETIC REED SENSORS AND MAGNETS |  |
| These are made of a reed switch with contacts protected by a glass bulb which contains inert glasses, this way mechanical and electrical deterioration are kept at minimum level. This is all contained in a plastic or metallic housing filled in with epoxidic resin which guarantees protection against humidity, vibrations and shocks. Available in the cylindrical and rectangular housing with open and changeover contacts. Magnets of various shapes and sizes are also available to activate these sensors. | ULTRASONIC SENSORS |  |
| Ultrasonic sensors for detection of objects in well defined areas or for distance measurement such as in the case of tank levels. Available in measuring distances from 20cm to 5 metres. Available in M12, M18 hausing, parallelepiped housing and fork housing. Programmable by means of potentiometer or self-programmable M12 version.
All models are available with analogue or digital outputs both in current as well as voltage and all models are supplied with M8 outlet connectors except the M12 housing version which is supplied with the M12 connector plug. | MAGNETIC SENSORS FOR CYLINDERS |  |
|
This range of sensors is mainly used to detect the position of a magnetic piston element found in linear and rotary pneumatic cylinders. An Led is used to confirm that the sensor has changed status through the detection of the cylinders piston magnet.
The output information from the sensor is then used to signal further electrical functions as required. Our sensors are available in Reed and Magneto Resistive types and all are supplied with moulded cable. All models are available with cable or cable with M8 connector.
|
|
