| Circuit | Custom one-chip of microprocessor LSI |
| | circuit. | | | | | |
| Display | LCD size : 52 mm x 38 mm | |
| | LCD with green backlight ( ON/OFF ). |
| Measurement | Velocity, Acceleration, Displacement |
| | | | | |
| Function | Acceleration, Velocity : | |
| | | RMS, Peak, Max. Hold. | |
| | Displacement | : | | |
| | | p-p ( peak-peak ), Max-hold p-p. |
| Unit | Measurement | | Metric | Imperial |
| | Acceleration | | meter/s^2,G | ft/s^2, |
| | Velocity | | | | mm/s, cm/s | inch/s |
| | Displacement | | mm | inch |
| Frequency | 10 Hz to 1 KHz | | |
| range | * | Sensitivity relative during the | |
| | | the frequency range meet ISO 2954 |
| | | Refer to table 1, page . | |
| Circuit | Exclusive microcomputer circuit. | |
| Peak | Acceleration, Velocity : | |
| Measurement | | To measure and update the peak |
| | | value. | | | |
| | Displacement | : | | |
| | | To measure and update the peak to |
| | | peak ( p-p ) value. | |
| Max. Hold | Acceleration, Velocity : | |
| Measurement | | To measure and update the max. peak |
| | | value. | | | |
| | Displacement | : | | |
| | | To measure and update the max. |
| | | peak to peak ( p-p ) value. | |
| Zero Button | Under Acceleration ( RMS ) measurement, |
| | sensor motionless , press Logger Button |
| | > 5 seconds. | | | |
| Max. Hold Reset | Under Max. hold measurement, press |
| Button | Logger Button > 5 seconds. | |
| Analog output | Export the Vibration analog signal via |
| | meter's " Vibration analog output terminal ", |
| | it can connect the " Spectrum analyzer APP " |
| | or used for other application. | |
| | * When measurement value is | |
| | | 100 | m/s^2 , the analog output will |
| | | be approx. AC 250 mV typically. |
| Datalogger | Auto | | 1 second to 3600 seconds |
| Sampling Time | | | | @ Sampling time can set to 1 second, |
| Setting range | | | | but memory data may loss. |
| | Manual | | Push the data logger button |
| | | | | once will save data one time. |
| | | | | @ Set the sampling time to |
| | | | | 0 second. | |
| | | | | @ Manual mode, can also select the |
| | | | | 1 to 99 position ( Location ) no. |
| Memory Card | SD memory card. 1 GB to 16 GB. |
| Advanced | * Set clock time ( Year/Month/Date, | |
| setting | | Hour/Minute/ Second ) | |
| | * Decimal point of SD card setting | |
| | * Auto power OFF management | |
| | * Set beep Sound ON/OFF | |
| | * Set sampling time | |
| | * SD memory card Format | |
| Data Hold | Freeze the display reading. | |
| Memory Recall | Maximum & Minimum value. | |
| Sampling Time | Approx. 1 second. | |
| of Display | | | | | | | |
| Data Output | RS 232/USB PC computer interface. |
| | * | Connect the optional RS232 cable |
| | | UPCB-02 will get the RS232 plug. |
| | * | Connect the optional USB cable | |
| | | USB-01 will get the USB plug. | |
| Operating | 0 to 50 ℃. | | | |
| Temperature | | | | | | | |
| Operating | Less than 85% R.H. | |
| Humidity | | | | | | | |
| Power Supply | * Alkaline or heavy duty DC 1.5 V battery |
| | ( UM3, AA ) x 6 PCs, or equivalent. | |
| | * DC 9V adapter input. ( AC/DC power | |
| | adapter is optional ). | |
| Power Current | Normal operation ( w/o SD card save | |
| | data and LCD Backlight is OFF) : | |
| | Approx. DC 15 mA. | |
| | When SD card save the data and LCD | |
| | Backlight is OFF) : | |
| | Approx. DC 36 mA. | |
| | | |
| Weight | Meter : | |
| | 515 g/ 1.13 LB. | |
| | Probe with cable and magnetic base : | |
| | 99 g/0,22 LB | |
| Dimension | Meter : | |
| | 203 x 76 x 38 mm | |
| | Vibration sensor probe: | |
| | Round 16 mm Dia. x 37 mm. | |
| | Cable length : 1.2 meter. | |
| Accessories | * Instruction manual........................... | 1 PC |
| Included | * Hard carrying case, CA-06................ | 1 PC |
| | * Vibration sensor with cable............... | 1 PC |
| | * Magnetic base.................................. | 1 PC |
| Optional | SD Card ( 2 G ) | |
| Accessories | AC to DC 9V adapter. | |
| | USB cable, USB-01. | |
| | RS232 cable, UPCB-02. | |
| | Data Acquisition software,SW-U801-WIN. |
