| 中 | 可程式/经济型恒温恒湿/高低温试验机 | | | | | | | |
| 英 | PROGRAMMABLE/CHEAP TEMPERATURE & HUMIDITY/HIGH LOW TEMPERATURE CHAMBER | | | | | | | |
| | | | | | | |
| | 1.箱体采用CNC数位工作母机成型，圆弧造型美观大方，并采用平面无反作用把手，操作容易。 | | | | | | | |
| | | | | | | |
| 2.箱体内外部材质采用不锈钢（SUS#304)，外部更施於环氧树脂涂装，以增加外观质感及洁净度。 | | | | | | | |
| | | | | | | |
| 3.补水箱置控制箱体前侧的下部，外拉式水箱的设计，更便利操作补充水源。 | | | | | | | |
| | | | | | | |
| 4.大型观测视窗附照明保持箱内明亮，且利用发热体内嵌式玻璃，随时堡持清晰的观测箱内的状况。 | | | | | | | |
| | | | | | | |
| 5.加湿系统管路欤控制电路板之间增设集水盘，可避免因管路漏水影响电路，提高安全性。 | | | | | | | |
| | | | | | | |
| 6.箱体堡温层采用高强度PU发泡树脂欤高密度之玻璃纤维棉，厚度10公分可避免不必要之能量损失。 | | | | | | | |
| | | | | | | |
| 7.箱体左侧具一直径50mm之测试孔，可供外接测试电源线或信号线使用。 | | | | | | | |
| | | | | | | |
| 可程控制器 | 1.采用HONEYWELL IPC-1000超感度液晶（LCD)显示触控式荧幕画面，荧幕操作简单，程式编辑容易。 | | | | | | | |
| | | | | | | |
| 2.控制器操作界面设中、英、韩三国文字可供选择，且即时运转之曲线图可由荧幕显示。 | | | | | | | |
| | | | | | | |
| 3.具有30组程式800段999CYCLE步骤之容量，每段时间设定99小时59分。 | | | | | | | |
| | | | | | | |
| 4.具有10组程式串，每串可联结6组程式，每组程式中最多可设定５组副程式做循环。（999次） | | | | | | | |
| | | | | | | |
| 5.资料及试验条件输入后，控制器具有荧幕Lock锁定功能，避免人为触摸而停机。 | | | | | | | |
| | | | | | | |
| 6.具有P.I.D自动演算功能，可将温湿度变化条件立即修正，而使温湿度之控制更为精确稳定。 | | | | | | | |
| | | | | | | |
| 7.具有RS-232通讯界面及连线软件，可于电脑上设计程式、监视试验过程并执行开关机等功能。 | | | | | | | |
| | | | | | | |
| 8.具有9点故障讯息显示，于运转中发生异常状况，即刻切断电源，并于荧幕上即时显示故障原因。 | | | | | | | |
| | | | | | | |
| 9.具有4组时序讯号接点，可使运转过程中，对外输出控制接点，提供使用者进行动态试验。（选配） | | | | | | | |
| | | | | | | |
| 10.可提供温湿度线性直流信号输出至温湿度记录器，以了解测试条件之状态，进而提高检测信赖度。 | | | | | | | |
| | | | | | | |
| 冷冻及风跃系统 | 1.冷冻机采用法国铁甲武士压缩机，并使用环保冷煤（R134a、R404a、R23） | | | | | | | |
| | | | | | | |
| 2.冷冻系统采用二元式低温回路系统设计，并于不同温域采用不同压缩机作功，翠增加设备使用寿命。 | | | | | | | |
| | | | | | | |
| 3.利用多翼式送风机强力送风循环，避免任何死角，可使测试区内温湿度分布均匀。 | | | | | | | |
| | | | | | | |
| 4.风路循环采用侧吹出风回风设计、风压、风速皆符合试验标准，并可使闸门瞬间温湿度回稳时间快 | | | | | | | |
| | | | | | | |
| 5升湿、降温、加湿、除湿系统独立可提高效率，降低测试成本，增长寿命，减低故障率。 | | | | | | | |
| | | | | | | |
| 选购配件 | 1.隔层架 (SHELVES) | | | | | | | |
| 2.测试孔 (CABLE PROT) | | | | | | | |
| 3.液态氮喷射装置 (LIQUID N2 INJECTION) | | | | | | | |
| 4.自动补水系统 (WATER SUPPLY SUBSYSTEM) | | | | | | | |
| 5.低湿除湿系统 (LOW HUMIDITY DEHUMIDIFIER) | | | | | | | |
| 6.纯水处理装置 (REVERSE OSMOSIS WATER PURIFIER) | | | | | | | |
| 7.温湿度记录器 (TEMPERATURE AND HUMIDITY RECORDER) | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| 型号 | TH/WCT-1P(S)-A(B,C,D,E) | TH/WCT-2P(S)-A(B,C,D,E) | TH/WCT-3P(S)-A(B,C,D,E) | TH/WCT-4P(S)-A(B,C,D,E) |
| 测试区尺寸 | 45×60×45 | 50×75×60 | 80×80×80 | 100×100×100 |
| Internal Dim. |
| 外型尺寸 | 108×145×80 | 113×160×95 | 143×165×115 | 163×185×135 |
| External Dim. |
| 工作温度范围 | 100℃（+150℃）～-70℃（A:0℃、B:-20℃、C:-40℃、D:-60℃、E:-70℃ |
| Temp. Range |
| 相对湿度范围 | 20％～98％R.H. |
| Relative humidity Range |
| Features | 机器性能 | 解析精度 | TH-P:温度0.01℃，温度0.1％R.H.：TH-S/WCT-P/WCT-S:温度0.1℃，温度0.1％R.H. |
| Indication Resolution | TH-P:Temp.0.1℃，Humi.0.1%R.H.:TH-s/wct-P/wct-s:Temp.0.1℃，Humi.0.1%R.H. |
| 控制精度 | 温度：±0.3℃；温度：±2.5％R.H. |
| Temp.& Humi.Constancy | Temp.:±0.3℃；Humi.：±2.5％R.H. |
| 升温时间 | ℃ | 100 | 100 | 100 | 100 |
| Heat-up time | min | 35 | 40 | 50 | 50 |
| 降温时间 | ℃ | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 |
| Pull-down time | min | 30 | 45 | 50 | 60 | 90 | 30 | 45 | 50 | 60 | 90 | 30 | 45 | 50 | 60 | 100 | 30 | 45 | 50 | 60 | 120 |
| Material | 材质 | 外部材质 | SUS#304不锈钢板+粉体涂装 |
| External | SUS#304 stainless steel plate + Trituration Coating |
| 内部材质 | SUS#304不锈钢板 |
| Internal | SUS#304 stainless steel plate |
| 隔热材质 | PU及隔热棉 |
| Insulation | PU & Fiberglass wool |
| Systems | 系统结构 | 循环系统 | 多翼式循环风扇 |
| Circulation | Siroco fan |
| 加热系统 | SUS#304不锈钢高速电热器 |
| Heating | SUS#304 stainless steel high-speed heater |
| 加湿方式 | 表面蒸发方式 |
| Humidifying | Surface evaporating system |
| 冷却系统 | 欧美原装压缩机+鳍片式蒸发器+气冷式冷凝器 |
| Cooling | Airtight compressor + evaporator fins +air-cooling condenser |
| 除湿方式 | ADP临界路露点冷却除湿方式 |
| Dehumiditying | ADP Critical dewpoint cooling/dehumiditying method |
| 控制系统 | TEMI |
| 其他配件 | 多层强化玻璃视窗、测试孔（¢50MM)、动作指示灯、箱内照明、隔层置物架(两个) |
| Other components | Vacuum glass inspection window, cable port(¢50mm), control status indicator lights, chamber lamp, experiment separation shelves(freely adjustable 2 pcs). |
| 安全装置 | 电路系统负载保护、压缩机负载堡护、控制系统负载保护、加湿系统负载保护、超温负载保护、故障警示灯 |
| Savety devices | Overheating prevention circuit-breaker, compressor overload protection, control system overload perevention, humiditying system overheating, drying out prevention, breakdown indicator light. |
| 电源(AC1ф,220V，50Hz) | | | | A | 25 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 45 | 60 | 60 | 60 | 30 | 45 | 60 | 60 | 60 |
| Power Source |
| 电源(AC3ф,380V，50Hz) | | | | A | | | | | | | | | | | | 30 | 45 | 45 | 45 | 30 | 45 | 45 | 45 | 45 |
| Power Source |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| 恒温恒湿英文资料 |
| PROGRAMMABLE TEMPERATURE & HUMIDITY CHAMBER |
| 1. Hight capacity programming memory |
| *Can store up to 99 programs,each with up to 700 segments, |
| Which can be repeated up to 999 times; segments and programs |
| Can be joined and separated. |
| *Simultaneously remembers up to 99 programs. Segments can be |
| Repeated in the middle of programs. |
| *Can Temp & Humi. One or many patterns of operating conditions, |
| Up to 700 different settings of temperature, humidity and duration. |
| *Electrical failure memory is activated in power outages, to that |
| Program resures when power is restored. |
| *Can store and indicate total elapsed time. |
| *Automatic self-adjustment follows temperature and humidity patterns. |
| |
| 2. Convenient operation |
| *Microprocessor guides you step by step through the programming, |
| And signals possible programming errors. |
| *New settings are automatically saved in memory. Settings can be |
| Stored for up to 5 years. |
| *Each control parameter can be controlled separately during operation, |
| For example: power output, cycle countdown, rate of change, |
| Or temperature, etc. |
| *Programs can be “locked" to prevent accidental resetting. |
| |
| 3. Special Control Functions |
| *The rate of temperature change can be preset in the program. |
| *A Timer signal output relay enables results from every step of the |
| Process to be conveyed to all necessary peripheral devices. |
| *All heating, cooling, humidifying and dehumidifying elements are |
| Controlled by a microprocessor which executes all temperature and |
| Humidity commands. |
| |
| Option |
| *Through RS232C serial ports, computers can be attached for control |
| And information management. |
| *An automatic temperature and humidity recording device can be |
| Connected to increase the reliability of the test. |
| *The control unit may be physically separated from the testing |
Bitmap | Chamber for remote control operation. | |
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| Mode | TH-1P- | TH-2P- | TH-3P- | TH-4P- |
| Inter Dim.W×H×D(cm) | 40×50×40 | 45×60×45 | 50×75×60 | 100×100×80 |
| External Dim.W×H×D(cm) | 92×130×70 | 97×140×75 | 102×155×90 | 152×180×110 |
| Temp. Range | -70℃~100℃(+150℃)(A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃ |
| *RelativeHumildity Range | 20%~98%R.H. |
| Features | Temp. & huml.constancy | ±0.3℃；±2.5%℃ |
| Temp. & humi. uniformity | ±0.5℃; ±4%R.H. |
| Indication resolution | 0.1℃;0.1%R.H./0.01℃;0.1%R.H. |
| Heat-up time (min.) | About 30 to 50 |
| Pull-down time (min.) | About 45 to 120 |
| Material | Exterior | SUS#304 stainless steel plate |
| Interior | SUS#304 stainless steel plate |
| Insulation | PU & Fiberglass wool |
| Systems | Circulation | Siroco fan |
| Heating | SUS#304 stainless steel high-speed heater |
| Humidifying | Surface evaporating system |
| Cooling | Airtight compressor+evaporator fins+air-cooling condenser |
| Dehumidifying | ADP Critical dewpoint cooling/dehumidifying method |
| Control | Digital electronic indicators, programmable computer controller+S.S.R. |
| Other components | Vacuum glass inspection window, cable p：ort(Φ35mm),control status indicator lights, chamber lamp, experiment separation shelves (freely adjustable 2 pcs). |
| Savety devices | Overheating prevention circuit-breaker,compressor overload protection, control system overload prevention, humidifying system overheating and drying out prevention, breakdown indicator light. |
| Power source | AC 1Φ/3Φ,220V±10%,50/60HZ. |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| 恒温恒湿 恒温恒湿试验机 恒温箱 恒温恒湿箱 恒温恒湿机 恒温恒湿试验箱 LED专用恒温恒湿机 | | | | | | | | | |
