50KN变频拉力试验机

1.       Testing standard modularization function:to provide user-set necessary application testing and standard settings,and the range covers GB,ASTM,DIN,JIS,BS,etc,The testing standard specifications.

2.       Testing objects information:to provide aii the user-set testing objects data,and one-time input the data for permanent repeated using you can add or modify formula by yourself to raise the propriety of the testing data

3.       Double reports edition;full open user-editing report for the testers to select the favorabie report form （the hesting program newly adds the internally built EXCEL report editing function to extend the form of the report,whichis formerly singular）

4.       Each length,force unit,display digit adopts dynamic exchanging mode,force unit T,Kg,N,KN,g and lb,and deformation unit mm.cm and inch,

5.       Automatic optimization of graphic curve scale（Auto Scale）can make the graph display in optimal scale,and make the real-time graph dynamic switchin the test with loaddisplacement,load-time,stress-strain,load-2-point extension chart,and multi-curve comparison.

6.       The testing results can be output in data in EXCEL form.

7.     After thete sting.automatically and manually save the files,and calculateMax.force,up and down yield strength,lagging ring method.step-by-step method,non-proportion extending strength,tensile strength,pressive strength,random point set elongation strength,random point set load extension,elasticity modulus,extension rate,stripping interval Max.value Min value,average value,net energy,turn-back energy,total energy,bending modulus,breakpoint displacement x％ load,breakpoint load x％ displacement,etc, Data backup:the testing data can be saved in required hard disc partition.

8.       Multiple languages can be randomly switched:simplified chines,tradi tional Chinese,and English.

9.       The software has the function of the histing data demonstration.

H o s t  s p e c f I c a t I o n s

1.  High-accuracy American Transcell force sensor:matching within 50KN.The force accuracy is within ±5%

2.  Capacity segmentation:seven shifts in the entire travel:×1%,×2%, ×5%,×10%,×20%,×50% and ×.The high-accuracy 24 bits A\\D is adopted,and the sampling frequency is 200HZ,and Max,force resolution in the entire travelis 1\\1000.00

3.  Power sysyem:Taiwan AC frequency conversion motor＋Taiwan lnverter＋Taiwan reducer＋T-screw＋Bare linear bearings＋Synchronous belt.

4.   Control system:the Pulse Command control mode is adopted to make the control more accurate,with the speed control range of 15-500㎜∕min,The intermediate plate adjustment has the functions of rapid rough adjustment and slow fine adjustment,after testing,automatically return to the original point and automatically save.

5.  Data transmission mode:RS232 transmission

6.  Display mode:display in the screen of the computer with UTM107﹢WLN-XP testing software.

7.  The force linear double calibration system with the simple one shift and the accurate seven shifts in the entire travel.

8.  The luxury testing interface software can realize the control modes of speed setting,displacement setting,load setting（can set holding time）,load increase rate setting,stress increase rate setting,strain increase rate setting,etc,and together with the multi-level control mode,can meet various testing requirements.

9.  Testing space:the testing width is about 400mm（standard specifications）and the link plate moving space is about 900mm（not includings）（standard specificstions）

10.  Entire-travel displacement:the encoder is1800P／R,the LINE DRIVE encoder is adopted to increase 4 times accuracy with extremely strong capacity ofbresisting disturbance,and the displacement resolution         

id 0.001mm.（optional）

11.  Safety devices:overload emergency shut-down device,uo and down travel    limiting device,electric leakage auto-power-off system, and automatic          breakpoint halt function.

12.  Manual control mode:wireless remote control device or manual control

case can be added.

A t t a c h m e n t s

1.   One-year quality guarantee and Chinese operating instruction

2.   One group of standard tension jigs given with the machine（other jigs to be purchased）

3.   One piece of testing software specialized for the tensile machine

4.   One brand computer and one color printer

    M a i n t e c h n i c a l i n d e x

1.  Load cell:optional within 50KN

2.  Force resolution:1／100000

3.  Force accuracy:≤0.5%

4.  Force magnification times:automatic switching of 7 shifts

5.  Displacement resolution: 1／1000

6.  Displacement accuracy: ≤0.5%

7.  Metal extensometerresolution: 1／1000

8.  Metal extensomet accuracy: ≤0.5%

9.  Large deformation extensometer accuracy:±1mm

10. Speed range:0.001-1000mm／min（special testing speed can be made according to customer’s need）

11. Movement space:900mm（not including clamp holder,and special testing space can be made according to customer’s need）

12.Testing width:350mm（special testing width can be made according to customer’sneed）

13.Applying power source:￠220v50HZ

14.Power:about 1.5KW

15.Machine dimensions:about640×720×2000MM（length×width×heinht）

16.Machine weight:about280kg

Experimental Jiangdu days Hui Machinery Co., Ltd. :0514 -8,678,861,2   86,788,613    :0514 -86,588,229