深圳市世家仪器有限公司
深圳市世家仪器有限公司
福禄克全新高精度2500V高压绝缘测试仪，专为要求苛刻的工业用户量身设计。高达500GΩ大量程，满足更大的应用范围。全新设计电路，可更快速读取稳定的测量数据，高效工作快人！Fluke严苛的安全设计，保证F-1535和1537都满足CAT IV 600V标准及电力行业规范DLT845。轻量化及低功耗设计，满足灵活机动的外场工作需要。F1537更具有步进电压，用于进一步分析绝缘材料的极化指数（PI......
主要特性
Fluke1535功能如下：
绝缘测量量程高达500GΩ；
具备快速测量设计，绝缘阻值会较快达到稳定读数，工作快人！
具备自动计算的极化指数（PI）/介电吸收比（DAR）功能/介质放电率（DD）功能**
低功耗设计满足高强度工作需求：2500V测量次数高达1300次，250V测量可达6500次*；
具备高安全性设计，具有危险电压报警功能，符合CAT IV 600V标准及电力行业规范DLT845；
全新高可靠性设计，包括50°C高温和80%湿度环境下，依旧保持对应的电气规格，表笔及对应端口通过30000次插拔实验。
* 基于Fluke内部实验室测量
Fluke1537除具备上述特点外，还具有以下功能：
交流电压/直流电压/电阻测量
可微调的测试电压：250 V 至 2500 V，调节幅度为 100 V
介质放电 (DD)
线性增加 (100 V/s) 应用测试电压的步进模式
用户自定义标签，测试，测量结果保存
击穿电压指示
用于下载测试数据的Mini USB 接口
PC 软件
The main features
Fluke1535 features are as follows:
Insulation measurement range as high as 500 g Ω;
With fast measurement design, insulation resistance value will quickly reach a stable reading, the work of a one-upper!
Function of polarization index (PI)/dielectric absorption ratio (DAR)/dielectric discharge rate (DD) automatically calculated **
Low power consumption design meets the requirements of high intensity work: 2500V measurement up to 1300 times, 250V measurement up to 6500 times *;
With high safety design, with dangerous voltage alarm function, in line with CAT IV 600V standard and power industry specifications DLT845;
New high reliability design, including 50 ° C under high temperature and 80% humidity, still keep the corresponding electrical specifications, pens and by 30000 plug experiments and corresponding port.
* based on Fluke internal laboratory measurements
In addition to the above features, Fluke1537 also has the following functions:
Ac/dc voltage/resistance measurement
Adjustable test voltage: 250 V to 2500 V, adjustable range is 100 V
Dielectric discharge (DD)
Linear increase (100 V/s) applies the step mode of the test voltage
User-defined labels, time-limited testing, measurement results saved
Breakdown voltage indication
Mini USB interface for downloading test data
PC software
仪表网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
