频谱分析仪FSEK30
★ RMS Detection
★ Pretrigger
★ Eight marker
★ Color TFT Display
★ Dig/Ana Radio
★ Spread spectrum ch
★ High DynamicRange
★ Quasi-analog display
★ Modular design
★ CAL inerval to 2 yrs
★ Built-in self test
FSEK30 Performance Characteristics
Form Factor Mainframe
Input Impedance 50 Ohm
Minimum Frequency 20 Hz
Maximum Frequency 40 GHz
Frequency Accuracy 0.000000000025 %
Zero Span Yes
Minimum Sweep Time 1 us
Maximum Sweep Time 2500 s
Minimum Resolution Bandwidth 1 Hz
Maximum Resolution Bandwidth 10 MHz
Resolution Bandwidth Steps 1/2/3/5
Minimum Video Bandwidth 1 Hz
Maximum Video Bandwidth 10 MHz
Video Bandwidth Steps 1/2/3/5
Minimum Single-Side-Band Noise -129 dBc/Hz
Maximum Single-Side-Band Noise -81 dBc/Hz
Maximum Safe AC Input 0.1 dBm
Maximum DC Input 0 V
Minimum Displayed Average Noise -116 dBm
Maximum Displayed Average Noise -74 dBm
Maximum Dynamic Range 160 dB
Trigger Source External,Internal
Trigger Modes Freerun,TTL
Demodulation AM,FM
Connector type main signal Type-Nf
Probe Power Yes
External Frequency Reference 10 MHz
Noise Source Driver No
FSEK30 Programmability/Connectivity
User Interface Proprietary
Ports to Peripheral Devices GPIB,RS232
Data Storage Type FDD,HDD
FSEK30 Compliance
CE Compliance Not on file
UL Compliance Compliant
FSEK30 Power Requirements
Input Power Universal Auto SenseSwitch
FSEK30 Physical Dimensions
·Width: N/A
·Height: 236 mm9.29 in
·Length: 460 mm18.11 in
·Weight: 25.8 kg56.87 lb
FSEK30 Standard Accessories
·Adapter 3.5mm /Adapter 3.5mm-FemaleN Male /Qty:1
·Operating Manua /Operating Manual /Qty:1
FSEK30 Options
· Option 02 = 7GHz Frequency Extension
· Option 07 = Vector Signal Analyzer
· Option 15 = Controller with mousekeyboard
· Option 16 = Ethernet Interface 15 contact AUI connector
· Option 17 = Second ICE/IEEE-bus interface
· Option 49 = Ethernet Interface BNC
· Option B2 = 7GHz Frequency Extension
· Option B7 = Vector Signal Analyzer
· Option B8 = Tracking Generator 3.5GHz
· Option B9 = Tracking Generator 3.5GHz with I/Q modulator
· Option B10 = FSE-B10 Tracking Generator 7GHz
· Option B11 = FSE-B11 Tracking Generator 7GHz with I/Q modulator
· Option B12 = Switchable attenuator for tracking generator
· Option B13 = 1 dB Step Attenuator
· Option B15 = Controller with mousekeyboard
· Option B16 = Ethernet Interface 15 contact AUI connector
· Option B17 = Second ICE/IEEE-bus interface
· Option B18 = Removable Hard Drive
· Option B19 = Second Hard Drive firmware included
· Option B21 = External Mixer
· Option B22 = Increased Level Accuracy up to 2GHz
· Option B23 = Broadband Output 741.1MHz
· Option B1604 = Ethernet Interface RJ-45 Connector
