安科瑞 铁塔差异化配电 通信基站直流6回路电能表 AMC16-DETT
AMC16-DETT 基站直流电能计量模块主要是针对有共享需求，且开关电源无分用户电量计量功能的基站而设计的。仪表可对六个回路的直流电能进行计量，并可为配套的霍尔传感器提供工作电流，同时可通过上位机软件实现零漂校准，具有遥测、遥信、遥调、实时电量计量、供电质量异常告警、信息存储及处理、信息交互等功能。
该模块可分别计量三家运营商的直流用电量，为基站节能改善提供详细的数据依据，为直流配电设备提供分项计量解决方案。模块具有工业标准的 RS485 通讯接口,采用 YD/T1363.3-2014 规定的通讯协议，符合中国铁塔有限公司 Q/ZTT 2205-2017《基站直流电能计量模块技术要求》相关技术要求。
2020年5G元年，我国通信行业呈蓬勃发展之态，各大运营商和铁塔集团在布局新一代通讯基站。基站用电量不断上升，通信基站智能化电力监控及节能管理已成为各运营商企业的研究方向。
运营商基站共用可降低社会投资资本，但能耗计量问题困扰各大运营商，通过多回路智能电表对基站内的交流、直流设备进行检测和管理，并通过本地监控单元FSU将数据上传到区域监控中心LSC，*终传输至集中监控中心CSC监控平台，保障基站的可靠运营。
安科瑞 时丽花 18706162823
In the first year of 5G in 2020, our country's communications industry is undergoing vigorous development, and major operators and tower groups are deploying a new generation of communications base stations. With the rising of power consumption, the operators have made research on intelligent power monitoring and energy-saving management of base stations.
Operator base station sharing can reduce social investment capital, but the energy consumption problem plagues major operators. The multi-circuit energy meters can measure AC and DC equipment in the base stations and the data is uploaded to the LSC through FSU. Then, it is transmitted to the CSC monitoring platform to ensure the reliable operation of the base station.
基站动环监控系统
Base station dynamic environment monitoring system
基站动力配套示意图
基站供电系统由交流供电和直流供电系统组成。交流供电系统：由一路市电电源、一路移动油机电源、浪涌保护器、交流配电箱（具备市电油机切换功能）组成。直流供电系统：由开关电源、蓄电池组成。
Schematic diagram of base station power supply
The base station power supply system consists of AC and DC power supply systems. AC power supply system consists of one channel mains power supply, one channel oil machine power supply, surge protector and AC distribution box. DC power supply system consists of switching power supply and storage battery.
基站内的开关电源、空调、照明以及插座等都由交流配电箱进行供电，并通过多回路交流仪表实现高精度分项计量，而基站内各类通信设备主要是由直流系统进行供电，利用基站直流电能计量模块对不同运营商的通信设备实现能耗监测，*终通过FSU设备接至动环监控平台，实现对通信基站的能耗监测及管理。
The switching power supply, air-conditioning, lighting and sockets in the base station are all powered by the AC distribution box, and high-precision sub-metering is achieved through multi-circuit AC meters. The various communication equipment in the base station is mainly powered by DC system and the base station DC energy meter can realize energy consumption monitoring of them, and finally connects to the dynamic monitoring platform through FSU.
交流多回路仪表
AC Multi-circuit Energy Meter
安科瑞 时丽花 18706162823
直流多回路仪表
DC Multi-circuit Energy Meter
安科瑞 时丽花 18706162823
