测试电流 | AC 3A ~ 32A |
测试电压 | *大 8V AC Typically |
量测阻抗范围 | 0 to 0.12W, 0 to 0.6W 共 2 档 |
量测准确度 | 3A ~ 5A, +10% 满刻度 |
5A ~ 32A, +5% 满刻度 |
电流表 | 显示测试电流及警告设限值 |
阻抗表 | 显示测试电阻及 Fail 与 SUBTRACTION 设定值 |
切换开关 | Zero-start operating switch |
计时器 | 1S, 10S, 1MIN, 10MIN 共 4 档 |
警告 | Monitor the variation test current, when the test current is beyond+10% of the setting value, the warning operation will proceed. |
警告设定范围 3A ~ 32A |
SUBTRACTION | The resistance of testing line can be subtracted from the test value |
The subtraction range from 0 ~ 0.1W |
准确度 +10% |
GO-NOGO 判定设定 | If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed. |
设定值范围，为测试档位的 5% ~ |
准确度 +15% 满刻度 (3A ~ 5A)；+10% 满刻度 (5A ~ 32A) |
REMOTE CONTROL | 高电压输入 11V ~ 15V, 低电压 0 ~ 4V 及低电流输入 20mA 以下 |
测试模式 | 正常模式： 当警告声响起，测试停止 |
连续模式：当警告声响起，测试仍持续进行 |
蜂鸣器 | 当测试 fail 时，提供蜂鸣声 |
测试频率 | 50Hz 或 60Hz independent 视电源电压而定 |
输出信号 | TEST, GO, NG, WARNING, READY, MONITOR |
使用电源 | 交流 100V/120V/220V/240V+10%, 50/60Hz |
附件 | 测试线 GHT-115 x 1, 操作手册 x 1, 电源线 x 1 |
This instrument is designed to test Grounding continuity resistance of the monitor, Switching power supplies, Power cord and Electronic appliances. |
