P6248
- 1.7 GHz （Typical Probe Only ≤27 °C） 1X Mode
- 1.5 GHz Bandwidth （Guaranteed）
- 1.85 GHz （Typical Probe Only ≤27 °C） 10X Mode
P6247
- >1.0 GHz Bandwidth （Guaranteed）
P6246
- 400 MHz Bandwidth （Guaranteed）
General
- Low Input Capacitance: <1 pF Differential
- Probe Input Connector: Two Standard 0.025 in./0.63 mm （0.1 in. Center） Square Pin Receptacle （Female）
- Electrostatic Discharge Tolerant （IEC 801-2）
- Connects to TekProbe®BNC Interface on TDS Series Oscilloscopes or Other Instruments using 1103 TekProbe®Power Supply
- For use with Oscilloscopes, Spectrum Analyzers, or Network Analyzers
- >60 dB （1000:1） Common Mode Rejection Ratio （CMRR）
- Small Probe Head Allows Easy Probing of SMDs
Applications
- Communications （Gigabit Ethernet, IEEE-1394, Fibre Channel）
- Semiconductor Characterization （RAMBUS）
- Disk Drive Read Channel Design
- Communication Pulse Shape Compliance
- Jitter, Crosstalk, and BERT Measurements
- Location of Ground Bounce
The P6246, P6247, and P6248 Differential Probes
The P6248, P6247, and P6246 enable users to make time-domain or frequency-domain measurements on high-bandwidth signals commonly found in disk drive, digital IC design （RAMBUS）, and communication applications （Gigabit Ethernet, IEEE-1394 Firewire, and Fibre Channel）. The P6248 includes accessories that allow RAMBUS via probing and IEEE-1394 interconnect access. The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface-mount devices while maintaining high CMRR.
The P6246, P6247, and P6248 are ideal for design verification of disk drive read, channel electronics, and timing analysis for troubleshooting ground-bounce problems associated with high-speed logic. They can also be used for pulse shape or crosstalk compliance testing of high-speed communication signals.
