Industry – Dairy Processing

Application – Phase or Interface

Get control of Product Loss / Control your Efficiencies / Control your Risk /Save Money

Product – Quadbeam Technologies S20 Hygienic Suspended Solids Sensor.

With international milk solids prices forecast to hit record highs, getting control of product loss and increasing yields in the Dairy Industry has never been so important.

Using Quadbeam Technologies Ltd  suspended solids sensors provides accurate, reliable and repeatable monitoring. Monitoring that is used by plant managers as part of their performance improvement programs by reducing process waste.

固体牛奶价格预测创历史新高，获得产品的损失控制和提高产量的乳品行业从未如此重要。

使用quadbeam技术有限公司悬浮固体传感器提供准确，可靠和可重复的监测。监测是工厂的绩效改进方案的一部分，通过减少过程废物

Many plants control phase or interface detection between product and water of the first CIP flush or push when transitioning between products by solely using flow calculations and time.  Although an effective method it does not provide a true reflection of what is actually happening.  Processes change, new equipment is installed, pump performance can vary, factors that can have an impact on time and flow calculations.

许多植物控制阶段或界面检测的CIP冲洗产品和水或推之间转换时的产品仅使用流量计算和时间。虽然一个有效的方法，它不提供什么实际上是一个真正的反射发生。过程的改变，新设备的安装，泵的性能可以有很大的不同，可以有时间和流量计算的影响因素

By including a Quadbeam S20 Hygienic Sensor into the line it is possible to control interface or phase transition extremely accuray, maximising production yields and or into a solids recovery system to feed back into production and reducing waste treatment costs.

包括quadbeam S20卫生传感器进行可以控制接口或相变非常准确，zui大限度地提高产量，或成固体回收系统反馈到生产和降低废物处理成本。

Installation

Virtually any process or system that has a level of valuable solids and where regular CIP is done or several products are used in the same line are obvious places for savings through solids retention during transition.

The S20 Hygienic Sensor mounts directly into a 3” Triclover fitting, a welding ferrule, gasket and clamp are also supplied. 

The MXD75 transmitter , which has a 10 point linearisation curve,  is easily calibrated to relate a 4-20mA output to % solids in the line. This signal can then be feed into the plant PLC or DCS for overall control and monitoring.

几乎任何过程或系统，有一个有价值的固体和定期的CIP做或几种产品所使用的相同的线明显地节省通过固体停留在过渡。

S20卫生传感器直接安装到3”triclover配件，焊接套管，垫片和卡也提供。

该mxd75发射器，它有一个10点线性化曲线，易于校准涉及4-20mA输出%固体的线。该信号然后可以进厂PLC或DCS的总体控制和监测。

Returns

Returns can vary depending on the size of the system where the monitoring is installed.  Returns of $150,000pa have been secured when used in evaporators, large receiving or storage silos, process ring mains and filling lines.

Reduction in waste treatment costs with more solids going to product and less to waste.

退换商品

返回取决于系统的大小，监控安装。150000pa美元收益已获得使用时，蒸发器，大接收或储存仓，流程环电源和灌装线。

随着更多的固体要产品少浪费在垃圾处理成本降低。