当前位置：深圳博瑞图电子科技有限公司>>>>美国全新进口Microsemi flashpro4 usb线大量现货-PLC编程器

美国全新进口Microsemi flashpro4 usb线大量现货-PLC编程器

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号flashpro4 usb下载线

品牌

厂商性质经销商

所在地深圳市

在线询价收藏产品

联系方式：雷俊查看联系方式

更新时间：2017-06-08 10:59:41浏览次数：226次

联系我时，请告知来自仪表网

产品分类 品牌分类

  电子元器件

集成电路IC

暂无信息

深圳博瑞图电子科技有限公司

经营模式：经销商

商铺产品：47条

所在地区：广东深圳市

联系人：雷俊（销售经理）

询价 给他留言

产品简介

美国全新进口Microsemi flashpro4 usb下载线大量现货
FlashPro4 Device Programmer

Quickstart Card

This quickstart card applies only to the FlashPro4 device programmer.

Kit Contents

QuantityDescription

详细介绍

美国全新进口Microsemi flashpro4 usb下载线大量现货

FlashPro4 Device Programmer

Quickstart Card

This quickstart card applies only to the FlashPro4 device programmer.

Kit Contents

Quantity	Description

1	FlashPro4 programmer standalone unit

1	USB A to mini-B USB cable

1	FlashPro4 10-pin ribbon cable

Software Installation

If you are already using Ac's Libero® Integrated Design Environment (IDE), you have the FlashPro software installed as part of Libero IDE. If you are using the FlashPro4 device programmer for standalone programming or on a dedicated machine, download and install the latest release of the FlashPro software from the Ac website. The installation will guide you through the setup. Complete the software installation before connecting the FlashPro4 device programmer to your PC.

Note: Libero IDE v8.6 SP1 or FlashPro v8.6 SP1 are the minimum versions required to run FlashPro4.

Software releases: www.ac。。ｃｏｍ/download/program_debug/flashpro.

Hardware Installation

After installing the software successfully, connect one end of the USB cable to the FlashPro4 device programmer and the other end to your PC’s USB port. The Found Hardware Wizard will open twice. Use the wizard to install the driver automatically (recommended). If the Found Hardware Wizard cannot find the drivers automatically, then ensure you have properly installed the FlashPro software prior to installing the hardware. If the drivers still cannot be installed automatically, then install them from a list or specific location (advanced).

If FlashPro was installed as part of the Libero IDE default installation, the drivers are located at C:/Libero/Designer/Drivers/Manual. For a standalone FlashPro default installation, the drivers are located at C:/Ac/FlashPro/Drivers/Manual. Ac recommends the automatic driver installation.

FlashPro4 Device Programmer Quickstart Card

Note: FlashPro4 uses pin 4 of the JTAG connector whereas FlashPro3 had no connection to this pin. FlashPro4 pin 4 of the JTAG header is a PROG_MODE output drive signal. PROG_MODE toggles between programming and normal operation. The PROG_MODE signal is intended to drive an N or P Channel MOSFET to control the output of a voltage regulator between the programming voltage of 1.5 V and normal operation voltage of 1.2 V. This is required for ProASIC^®3L, IGLOO^® V2, and IGLOO PLUS V2 devices because, although they can operate at 1.2 V, they must be programmed with a VCC core voltage of 1.5 V. Please refer to FlashPro4 Backward Compatibility with FlashPro3 and Using FlashPro4 PROG_MODE for 1.5 V Programming of ProASIC3L, IGLOOV2, and IGLOO PLUS V2 Devices for more information.

TCK	1	2	GND
TDO	3	4	PROG_MODE
TMS	5	6	VJTAG
VPUMP	7	8	TRST
TDI	9	10	GND

Pin 4 on FlashPro4 programmers MUST NOT be connected or used for anything other than its intended purpose.

Common Issues

If the On LED does not light up after FlashPro4 driver installation, the driver might not be installed correctly and you must troubleshoot the installation. For more information, refer to the FlashPro Software and Hardware Installation Guide and the “Known Issues and Workarounds” section of the FlashPro software release notes: www.ac。。ｃｏｍ/download/program_debug/flashpro.

FlashPro4 may not operate correctly if pin 4 of the JTAG connector is improperly used. See the above note.

Documentation Resources

Refer to the FlashPro software page for further information:

www.ac。。ｃｏｍ/products/hardware/program_debug/flashpro.

Technical Support and Contacts

Technical support is available online at www.ac。。ｃｏｍ/support, by at tech@ac.com, or by phone:

Phone (NA): 800.262.1060

Phone (Int'l): +1 650.318.4460

Ac Sales offices, including Representatives and Distributors, are located worldwide. To find your local representative go to: www.ac。。ｃｏｍ/company/contact.

***************************************************

联系人 ;雷俊（先生）

深圳博瑞图电子科技有限公司

0755-36675904

MOB:13823138950

0755-83244576

ADD:深圳市福田区中航路世纪汇都会轩1416室

: 401512450

网址：www.szprotools。。ｃｏｍ

***************************************************

承接销售元器件IC一条龙、专注10年