深圳博瑞图电子科技有限公司
深圳博瑞图电子科技有限公司
jlink V9仿真器 德国赛格seeger
Disclaimer
Specifications written in this document are believed to be accurate, but are not guar-anteed to be entirely free of error. The information in this manual is subje
jlink V9仿真器 德国赛格seeger
jlink V9仿真器 德国赛格seeger
J-Link / J-Trace
User Guide
Software Version V4.96f
Manual Rev. 0
Date: February 4, 2015
Document: UM08001
A product of SEGGER Microcontroller GmbH & Co. KG
www.segger。。ｃｏｍ
2
Disclaimer
Specifications written in this document are believed to be accurate, but are not guar-anteed to be entirely free of error. The information in this manual is subject to change for functional or performance improvements without notice. Please make sure your manual is the latest edition. While the information herein is assumed to be accurate, SEGGER Microcontroller GmbH & Co. KG (the manufacturer) assumes no responsibility for any errors or omissions. The manufacturer makes and you receive no warranties or conditions, express, implied, statutory or in any communication with you. The manufacturer specifically disclaims any implied warranty of merchantability or fitness for a particular purpose.
Copyright notice
You may not extract portions of this manual or modify the PDF file in any way without the prior written permission of the manufacturer. The software described in this doc-ument is furnished under a license and may only be used or copied in accordance with the terms of such a license.
© 2014 SEGGER Microcontroller GmbH & Co. KG, Hilden / Germany
Trademarks
Names mentioned in this manual may be trademarks of their respective companies.
Brand and product names are trademarks or registered trademarks of their respec-tive holders.
Contact address
SEGGER Microcontroller GmbH & Co. KG
In den Weiden 11
D-40721 Hilden
Germany
.+49 2103-2878-0
.+49 2103-2878-28
: support@segger.com
Internet: http://www.segger。。ｃｏｍ
Revisions
This manual describes the J-Link and J-Trace device.
For further information on topics or routines not yet specified, please contact us.
Revision | Date | By | Explanation |
|
|
| Chapter "Related Software" |
V4.96f Rev. 0 | 150204 | JL | * Section "GDB Server" |
|
|
| Exit code description added. |
|
|
|
|
|
|
| Chapter "RTT" added. |
|
|
| Chapter "Related Software" |
V4.96 Rev. 0 | 141219 | JL | * Section "GDB Server" |
|
|
| Command line option "-strict" added. |
|
|
| Command line option "-timeout" added. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.90d Rev. 0 | 141112 | NG | * Section "J-Link Remote Server" updated. |
|
|
| * Section "J-Scope" updated. |
|
|
|
|
V4.90c Rev. 0 | 140924 | JL | Chapter "Related Software" |
* Section "JTAGLoad" updated. | |||
|
|
| |
|
|
|
|
J-Link / J-Trace (UM08001) © 2004-2014 SEGGER Microcontroller GmbH & Co. KG
3
Revision | Date | By | Explanation |
|
|
| Chapter "Working with J-Link and J-Trace" |
|
|
| * Section "Connecting multiple J-Links / J-Traces |
V4.90b Rev. 1 | 140813 | EL | to your PC" updated |
|
|
| Chapter "J-Link software" |
|
|
| * Section "J-Link Configurator" updated. |
|
|
|
|
V4.90b Rev. 0 | 140813 | NG | Chapter "Related Software" |
* Section "J-Scope" added. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Device specifics" |
V4.86 Rev. 2 | 140606 | AG | * Section "Silicon Labs - EFM32 series devices" |
|
|
| added |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.86 Rev. 1 | 140527 | JL | * Section "GDB Server" |
Command line options -halt / -nohalt added. | |||
|
|
| |
|
|
| Description for GDB Server CL version added. |
|
|
|
|
V4.86 Rev. 0 | 140519 | AG | Chapter "Flash download" |
Section "Mentor Sourcery CodeBench" added. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Working with J-Link" |
|
|
| * Section "Virtual COM Port (VCOM) improved. |
V4.84 Rev. 0 | 140321 | EL | Chapter "Target interfaces and adapters" |
|
|
| * Section "Pinout for SWD + Virtual COM Port |
|
|
| (VCOM) added." |
|
|
|
|
|
|
| Chapter "Related Software" |
|
|
| * Section "Command line options" |
|
|
| Extended command line option -speed. |
|
|
| Chapter "J-Link software and documentation |
|
|
| package" |
V4.82 Rev. 1 | 140228 | EL | * Section "J-Link STR91x Commander" |
Added command line option parameter to | |||
|
|
| |
|
|
| specify a customized scan-chain. |
|
|
| Chapter "Working with J-Link" |
|
|
| * Section "Virtual COM Port (VCOM) added. |
|
|
| Chapter "Setup" |
|
|
| * Section "Getting started with J-Link and DS-5" |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.82 Rev. 0 | 140218 | JL | * Section "GDB Server" |
|
|
| Command line option -notimout added. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.80f Rev. 0 | 140204 | JL | * Section "GDB Server" |
Command line options and remote commands | |||
|
|
| |
|
|
| added. |
|
|
|
|
|
|
| Chapter "Related Software" |
|
| JL/ | * Section "GDB Server" |
V4.80 Rev. 1 | 131219 | Remote commands and command line options | |
NG | |||
|
| description improved. | |
|
|
| |
|
|
| Several corrections. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.80 Rev. 0 | 131105 | JL | * Section "GDB Server" |
SEGGER-specific GDB protocol extensions | |||
|
|
| |
|
|
| added. |
|
|
|
|
|
|
| Chapter "Flash Download" |
V4.76 Rev. 3 | 130823 | JL | * Replaced references to GDB Server manual. |
Chapter "Working withc J-Link" | |||
|
|
| |
|
|
| * Replaced references to GDB Server manual. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.76 Rev. 2 | 130821 | JL | * Section "GDB Server" |
|
|
| Remote commands added. |
|
|
|
|
J-Link / J-Trace (UM08001) © 2004-2014 SEGGER Microcontroller GmbH & Co. KG
4
Revision | Date | By | Explanation |
|
|
| Chapter "Related Software" |
V4.76 Rev. 1 | 130819 | JL | * Section "SWO Viewer" |
|
|
| Sample code updated. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.76 Rev. 0 | 130809 | JL | * Sections reordered and updated. |
Chapter "Setup" | |||
|
|
| |
|
|
| * Section "Using JLinkARM.dll moved here. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.71b Rev. 0 | 130507 | JL | * Section "SWO Viewer" |
|
|
| Added new command line options. |
|
|
|
|
|
|
| Chapter "Introduction" |
V4.66 Rev. 0 | 130221 | JL | * Section "Supported OS" |
|
|
| Added Linux and Mac OSX |
|
|
|
|
|
|
| Chapter "Introduction" |
V4.62b Rev. 0 | 130219 | EL | * Section "J-Link / J-Trace models" |
|
|
| Clock rise and fall times updated. |
|
|
|
|
|
|
| Chapter "Introduction" |
V4.62 Rev. 0 | 130129 | JL | * Section "J-Link / J-Trace models" |
|
|
| Sub-section "J-link ULTRA" updated. |
|
|
|
|
|
|
| Chapter "Target interfaces and adapters" |
V4.62 Rev. 0 | 130124 | EL | * Section "9-pin JTAG/SWD connector" |
|
|
| Pinout description corrected. |
|
|
|
|
V4.58 Rev. 1 | 121206 | AG | Chapter "Intoduction" |
* Section "J-Link / J-Trace models" updated. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Working with J-Link" |
V4.58 Rev. 0 | 121126 | JL | * Section "J-Link script files" |
Sub-section "Executing J-Link script files" | |||
|
|
| |
|
|
| updated. |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.56b Rev. 0 | 121112 | JL | * Section "J-Link SWO Viewer" |
Added sub-section "Configure SWO output | |||
|
|
| |
|
|
| after device reset" |
|
|
|
|
|
|
| Chapter "Related Software" |
|
|
| * Section "J-Link Commander" |
V4.56a Rev. 0 | 121106 | JL | Renamed "Commander script files" to |
|
|
| "Commander files" and "script mode" to |
|
|
| "batch mode". |
|
|
|
|
V4.56 Rev. 0 | 121022 | AG | Renamed "J-Link TCP/IP Server" to "J-Link Remote |
Server". | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Related Software" |
V4.54 Rev. 1 | 121009 | JL | * Section "TCP/IP Server", subsection "Tunneling |
|
|
| Mode" added. |
|
|
|
|
|
|
| Chapter "Flash Breakpoints" |
|
|
| * Section "Licensing" updated. |
V4.54 Rev. 0 | 120913 | EL | Chapter "Device specifics" |
|
|
| * Section "Freescale", subsection "Data flash |
|
|
| support" added. |
|
|
|
|
V4.53c Rev. 0 | 120904 | EL | Chapter "Licensing" |
* Section "Device-based license" updated. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Flash download" |
|
|
| * Section "J-Link commander" updated. |
V4.51h Rev. 0 | 120717 | EL | Chapter "Support and FAQs" |
* Section "Frequently asked questions" updated. | |||
|
|
| |
|
|
| Chapter "J-Link and J-Trace related software" |
|
|
| * Section "J-Link Commander" updated. |
|
|
|
|
J-Link / J-Trace (UM08001) © 2004-2014 SEGGER Microcontroller GmbH & Co. KG
5
Revision | Date | By | Explanation |
|
|
| Chapter "Working with J-Link" |
V4.51e Rev. 1 | 120704 | EL | * Section "Reset strategies" updated and |
|
|
| corrected. Added reset type 8. |
|
|
|
|
V4.51e Rev. 0 | 120704 | AG | Chapter "Device specifics" |
* Section "ST" updated and corrected. | |||
|
|
| |
|
|
|
|
V4.51b Rev. 0 | 120611 | EL | Chapter "J-Link and J-Trace related software" |
* Section "SWO Viewer" added. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Device specifics" |
|
|
| * Section "ST", subsection "ETM init" |
V4.51a Rev. 0 | 120606 | EL | for some STM32 devices added.. |
* Section "Texas Instruments" updated. | |||
|
|
| |
|
|
| Chapter "Target interfaces and adapters" |
|
|
| * Section "Pinout for SWD" updated. |
|
|
|
|
V4.47a Rev. 0 | 120419 | AG | Chapter "Device specifics" |
* Section "Texas Instruments" updated. | |||
|
|
| |
|
|
|
|
V4.46 Rev. 0 | 120416 | EL | Chapter "Support" updated. |
|
|
|
|
V4.42 Rev. 0 | 120214 | EL | Chapter "Working with J-Link" |
* Section "J-Link script files" updated. | |||
|
|
| |
|
|
|
|
|
|
| Chapter "Flash download" added. |
|
|
| Chapter "Flash breakpoints" added. |
|
|
| Chapter "Target interfaces and adapters" |
V4.36 Rev. 1 | 110927 | EL | * Section "20-pin JTAG/SWD connector" updated. |
|
|
| Chapter "RDI" added. |
|
|
| Chapter "Setup" updated. |
|
|
| Chapter "Device specifics" updated. |
|
|
|
|
V4.36 Rev. 0 | 110909 | AG | Chapter "Working with J-Link" |
* Section "J-Link script files" updated. | |||
|
|
| |
|
|
|
|
V4.26 Rev. 1 | 110513 | KN | Chapter "Introduction" |
* Section "J-Link / J-Trace models" corrected. | |||
|
|
| |
|
|
|
|
V4.26 Rev. 0 | 110427 | KN | Several corrections. |
|
|
|
|
|
|
| Chapter "Introduction" |
V4.24 Rev. 1 | 110228 | AG | * Section "J-Link / J-Trace models" corrected. |
Chapter "Device specifics" | |||
|
|
| |
|
|
| * Section "ST Microelectronics" updated. |
|
|
|
|
|
|
| Chapter "Device specifics" |
|
|
| * Section "Samsung" added. |
V4.24 Rev. 0 | 110216 | AG | Chapter "Working with J-Link" |
* Section "Reset strategies" updated. | |||
|
|
| |
|
|
| Chapter "Target interfaces and adapters" |
|
|
| * Section "9-pin JTAG/SWD connector" added. |
|
|
|
|
|
|
| Chapter "J-Link and J-Trace related software" |
|
|
| * Section "J-Link software and documentation |
V4.23d | 110202 | AG | package in detail" updated. |
Chapter "Introduction" | |||
|
|
| |
|
|
| * Section "Built-in inligence for |
|
|
| supported CPU-cores" added. |
|
|
|
|
|
|
| Chapter "Working with J-Link" |
|
|
| * Section "Reset strategies" updated. |
|
|
| Chapter "Device specifics" |
V4.21g | 101130 | AG | * Section "Freescale" updated. |
Chapter "Flash download and flash breakpoints | |||
|
|
| |
|
|
| * Section "Supported devices" updated |
|
|
| * Section "Setup for different debuggers |
|
|
| (CFI flash)" updated. |
|
|
|
|
V4.21 | 101025 | AG | Chapter "Device specifics" |
* Section "Freescale" updated. | |||
|
|
| |
|
|
|
|
|
|
|
|
***************************************************
联 系 人 ;雷 俊 （先 生）
深圳博瑞图电子科技有限公司
0755-36675904
MOB:13823138950
0755-83244576
ADD:深圳市福田区中航路世纪汇都会轩1416室
: 401512450
网 址：www.szprotools。。ｃｏｍ
***************************************************
承接销售元器件IC一条龙、专注10年
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
西门子快速总连接器（90度不带编程接口）6ES7972-0BA52-0XA0-PLC编程器 西门子D
6ES7972-0BA52-0XA0 面议
西门子总线连接器（180度不带编程接口）6GK1500-0FC10-PLC编程器 西门子总线连接器（
6GK1500-0FC10 面议
西门子总线连接器（35度带编程接口）6ES7972-0BB42-0XA0-PLC编程器 6ES797
6ES7972-0BB42-0XA0 面议
西门子快速总连接器（90度带编程接口）6ES7972-0BB52-0XA0-PLC编程器 6ES79
6ES7972-0BB52-0XA0 面议
仪表网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
