上海鹰腾称重衡器有限公司
上海鹰腾称重衡器有限公司
闵行地磅//闵行地磅厂家
闵行地磅厂家：上海鹰腾称重衡器有限公司
闵行地磅厂家地址：上海市奉贤区解放东路1008号707-709室
闵行地磅//闵行地磅厂家
闵行地磅厂家：上海鹰腾称重衡器有限公司
闵行地磅厂家地址：上海市奉贤区解放东路1008号707-709室
闵行地磅厂家：
电子地磅简介：
上海鹰腾称重衡器专注5-150t标准电子地磅、汽车衡、电子秤、台秤等称重设备，荣获ISO9001质量认证汽车衡产品，市场覆盖率高，值得信赖的品牌，建筑工地汽车地磅。
质量是企业的生命：鹰腾始终坚持把服务放在*位，并坚持以“终身为您服务”为经营理念，力求把工作做得更好！
电子地磅称量迅速准确、操作使用方便、安装维护简单，为检测车辆超载超限及计重收费提供了一套行之有效的解决方案。
电子地磅特点：
高精度传感器（数字式或模拟式）；外表美观大方、过载能力强(250%) ；模块化、标准化秤台；秤台可以开孔、也可以不开孔；秤台任意组合、无须特别连接；自动复位机构；数字显示毛重、净重、皮重；动态、欠载和超载等状态显示；车号、皮重存贮、分项、总项累计；数字滤波、自动零跟踪；故障自诊断（数字式）；
抗干扰性好，传输距离更远， 可靠性更高（数字式）；更换传感器时无须重新标定（数字式）；远程网络管理功能；无基坑或浅基坑安装；可配置计算机及软件；可以连接大屏显示器；
Electronic loadometer:
Shanghai yingteng weighing apparatus dedicated 5-150t standard electronic loadometer, truck scale, electronic scales, scales and weighing equipment, won the ISO9001 quality certification of auto products, the market coverage rate is high, the trusted brand building site of special vehicle weighbridge.
Quality is the life of the enterprise: Eagle Teng always adhere to the service in the first place, and adhere to the "life for you" as the business philosophy, and strive to do a better job!
Quickly and accuray, electronic loadometer weighing convenient in operation, simple installation and maintenance, provides an effective solution for the detection of vehicle overload and weight charge.
The characteristics of electronic loadometer:
High precision sensor (digital or analog); beautiful appearance, strong overload capacity (250%); standard scale; scale can be open, can not open; scale free combination, no special connection; automatic reset mechanism; digital display gross weight, net weight and tare, dynamic; underload and overload status display; number, storage, partial and total tare cumulative; digital filtering, automatic zero tracking; fault diagnosis (digital);
Good anti-interference, far transmission distance, higher reliability (digital); the sensor is changed without re calibration (digital); remote network management; no pit or shallow pit installation; configuration of computer and software; you can connect a large screen display;
闵行地磅厂家：
闵行地磅//闵行地磅厂家
地磅主要生产工序：
下料（剪板）→折弯→上线焊接→成型→底漆→调试→面漆→品检→下线
主梁折弯：作为地磅的主要承重支撑，用料十分重要，本公司地磅主梁采用6~8MM钢材进行折弯。
经过多次重压测试，确保整体结构不变形。
焊接：主要是面板、主梁、端面板的焊接，面板用料一般分为8mm 10mm，12mm，U型梁结构地磅，焊接采用满焊，相较糟钢结构地磅点焊的更牢固。
焊后秤体模块整体抛丸。
消除焊接内应力，去除氧化皮，检查焊缝质量，如发现问题及时补焊提高产品质量。
焊接的质量也是决定地磅整体寿命的主要因素。
端面板在整个磅的结构中起着至关重要的作用，本公司端面板根据结构采用16~20MM面板，确保真材实料。
底漆：焊接完成后，地磅表面采用抛丸处理，清除表面锈蚀，提高油漆附着力，比喷砂处理除锈更*，除锈效果好。
本公司两次底柒采取富锌底漆，避免采用红丹底漆消极防腐原理，采用有效的锌比铁先置换反应快的原理保护磅体。
防锈效果更好。
地磅按称重范围分为：小地磅，大地磅，也可以分为小型地磅，轻型地磅，和大地型地磅。
小地磅一般指称重5吨以下，轻型为5~20吨。
大型30吨~200吨。
The main production processes loadometer:
Cutting (shearing), bending, on-line welding, forming, primer, debugging, top coat, quality inspection, assembly line
As the main load-bearing girder bending: loadometer support material is very important, the company uses 6~8MM to bend the steel girder loadometer.
After a number of stress tests to ensure that the overall structure is not deformed.
Welding: Welding panel, is the main girder, end panel, panel material is generally divided into 8mm 10mm, 12mm, U type beam structure with the welding loadometer, welding steel structure, compared with the bad spot more firmly loadometer.
Welding body block integral shot blasting.
To eliminate the welding stress, remove the oxide, check the quality of the weld, such as problems found in time repair welding to improve product quality.
The welding quality is main factor determining the whole life span of the weighbridge.
The end panel plays a crucial role in the structure of the pound, the company end panel according to the structure of the 16~20MM panel, to ensure genuine.
Primer: after welding, the surface of the shot blasting loadometer, remove surface corrosion, improve paint adhesion, than sandblasting derusting more thoroughly, derusting effect is good.
The two bottom seven take zinc rich primer, avoid using negative etch primer using effective anticorrosion principle, principle of zinc iron than the first replacement reaction fast protection pounds.
Anti rust effect is better.
According to the weighing range is divided into: loadometer loadometer loadometer small, big, also can be divided into small loadometer, light and earth type loadometer loadometer.
General reference small loadometer weighing 5 tons, 5~20 tons of light.
Large 30 tons ~200 tons.
闵行地磅厂家：
地磅常见的故障：
1、电子地磅无法开机
2、电子地磅充不进电、充电指示灯不亮
3、电子地磅无法称重、称量不准
4、电子地磅屏幕不亮、不显示
5、电子地磅按键不灵
6、称量货物时、电子地磅数据不稳定、跳数
7、电子地磅称不到满量程
8、电子地磅显示错误代码：ERR-
传感器不良的几种故障现象
1、称重后仪表有残留，不归零
2、数字的信号数字乱跳
3、传感器线断
4、传感器和仪表的插头连接量
5、传感器的屏蔽线不良，和传感器信号线或电源线短路
6、传感器的信号线短路
7、线性不好，滞后差
教你如何校准地磅：
1、角差校准：选择三分之一的（X为地磅zui大称量数）砝码，将标准砝码放在地磅秤台面的4角，分别进行称量，4个角的读数偏差均不得超过允许误差。
2、线性校准：选择用20% X和60% X的砝码，将标准砝码放在地磅称重台面的*，分别进行称量，读数与标准砝码对照，偏差不得超过允许误差。
3、地磅四角误差校准：取地磅三分之一的满量程载荷的标准砝码，分别放置于地磅称重中心位置，记录地磅稳定后的读数。
4、地磅示值误差校准：将满量程平均10等份，按每等份质量设定校验标准值，依次将标准砝码放置于地磅称重的中心位置，记录地磅稳定后的读数。
Loadometer common fault:
1, electronic loadometer can not boot
2, electronic loadometer not charge, charging indicator light is not bright
3, electronic loadometer weighing, weighing not allowed
4, electronic loadometer, does not display the screen is not bright
5, the key problems of electronic loadometer
Electronic loadometer data 6, weighing goods, unstable, hop
7, according to the full range of electronic loadometer
8, electronic loadometer display error code: ERR-
Some bad phenomena of sensor
1, after weighing instrument residue, not to zero
About 2 of the digital signal, digital
3, sensor wire broken
4, sensor and instrument plug connection
5, the sensor shielding line is bad, and sensor signal line or power line short circuit
6, sensor signal line short circuit
7, linear is bad, lag difference
Teach you how to calibrate the weighbridge:
1, 1/3: angle difference calibration (X is the maximum number of weights, loadometer weighing) will be placed in the 4 standard weight angle scale table, respectively, weighing, readings of 4 corners shall not exceed the allowable error.
2, linear calibration: 20% X and 60% X weight, standard weight on the central loadometer weighing mesa, were weighed, reading with the standard weight control, deviation shall not exceed the allowable error.
3, loadometer four angle error calibration: standard weight full-scale loading loadometer 1/3, were placed in the center position of loadometer loadometer weighing, recording after stable readings.
In 4, the value of error calibration: full scale loadometer average of 10 equal parts, each equal parts according to quality check standard setting value, in turn the standard weight placed in the center position of loadometer weighing, recording loadometer after stable readings..
闵行地磅厂家：上海鹰腾称重衡器有限公司
闵行地磅厂家地址：上海市奉贤区解放东路1008号707-709室
闵行地磅厂家：
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
仪表网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
