高质量隔爆型防爆操作柱 增安型防爆操作柱 ZX系列 防爆操作柱
| 适用范围： | ||
1、环境温度-25°至55° | ||
| 产品特点： | ||
1、壳体采用ZL102铝合金压铸而成，结构轻巧，外形美观。 |
五：型号含义：
安装、使用与维修
﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相符
﹒产品应可靠接地
﹒无论何种接线须将引入装置密封圈压。
﹒维修时必须切断前级电源后开盖
﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、
维修过程中若发现老化应与制造厂定购，并及时更换以确保防
爆性能
﹒在隔爆面上均匀涂以204-1防锈油脂后在投入使用
﹒周围环境温度为-20～+400C
﹒周围空气相对湿度不大于95%
﹒在无显著摇动和冲出振动的地方
﹒污染等级为3级
﹒无破坏金属和绝缘的腐蚀性气体或蒸汽的地方
□Installation usage, maintenance.
﹒Check the data before install it.
﹒Product should be link to ground.
﹒Cable should pressurized in to airproof quoit.
﹒cut off power before maintenance.
﹒In-build System and the rubber circle are made of oil-proof 3001, you
should contact our factory if the airproof quoit is damaged.
﹒Mop up 204-4 antirust grease before use it.
﹒The environment temperature is-20～+400C
﹒The relative humidity of the air around the equipment is not over95%
﹒No distinct shaking,concussion and libration
﹒The pollution grade is 3
﹒No corrosive gas and steam which can destroy the insulation of the metal
安装、使用与维修
﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相符
﹒产品应可靠接地
﹒无论何种接线须将引入装置密封圈压。
﹒维修时必须切断前级电源后开盖
﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、
维修过程中若发现老化应与制造厂定购，并及时更换以确保防
爆性能
﹒在隔爆面上均匀涂以204-1防锈油脂后在投入使用
﹒周围环境温度为-20～+400C
﹒周围空气相对湿度不大于95%
﹒在无显著摇动和冲出振动的地方
﹒污染等级为3级
﹒无破坏金属和绝缘的腐蚀性气体或蒸汽的地方
□Installation usage, maintenance.
﹒Check the data before install it.
﹒Product should be link to ground.
﹒Cable should pressurized in to airproof quoit.
﹒cut off power before maintenance.
﹒In-build System and the rubber circle are made of oil-proof 3001, you
should contact our factory if the airproof quoit is damaged.
﹒Mop up 204-4 antirust grease before use it.
﹒The environment temperature is-20～+400C
﹒The relative humidity of the air around the equipment is not over95%
﹒No distinct shaking,concussion and libration
﹒The pollution grade is 3
﹒No corrosive gas and steam which can destroy the insulation of the metal
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，仪表网对此不承担任何保证责任。
温馨提示：为规避购买风险，建议您在购买产品前务必确认供应商资质及产品质量。
