苏州宏瑞源科技股份有限公司
TDA-6C型悬浮粒子发生器是ATI制造的便携式Laskin nozzle喷射型产尘仪可以在气流流量从50到2000立方英尺每分钟的气流中产生次微米且浓度在10 到 100微克每升的悬浮粒子
TDA-6C气溶胶发生器美国ATI
TDA-6C
气溶胶发生器
TDA-6C型悬浮粒子发生器是ATI制造的便携式Laskin nozzle喷射型产尘仪可以在气流流量从50到2000立方英尺每分钟的气流中产生次微米且浓度在10 到 100微克每升的悬浮粒子
TDA-6C Aerosol Generator
TDA-6C气溶胶发生器
1, TDA-6C气溶胶发生器产品特点:
1.1 气流范围广(50-2,000CFM)
1.2 Laskin Nozzle 喷射产尘
2, TDA-6C气溶胶发生器应用
2.1 洁净工作台
2.2 洁净房
2.3 HVAC系统
2.4 HEPA过滤器
2.5 ULPA过滤器
2.6 手术室
2.7 核子过滤系统
2.8 汇集保护过滤器
2.9 研究与发展
3, TDA-6C气溶胶发生器产品介绍:
TDA-6C气溶胶发生器是ATI制造的便携式Laskin nozzle喷射型产尘仪可以在气流流量从50到2000立方英尺每分钟的气流中产生次微米且浓度在10 到 100微克每升的悬浮粒子.所有的Laskin nozzle喷射型产尘仪都采用耐用的不锈钢结构,大的填充口,独立的喷嘴控制,压力控制和3"标准的清洁接头输出.一个可选的适配器可使悬浮粒子导入正压系统.无论您什么测试需要,我们都会有一款符合您的要求.
TDA-6C气溶胶发生器是zui近设计的耐用的,轻便的Laskin nozzle产尘仪.TDA-6C是一个独立的产尘仪仅仅只需要一个合适的电压源供应便可产生多分散的次微米悬浮粒子.
TDA-6C气溶胶发生器功能:
TDA-6C气溶胶发生器有6个Laskin nozzle喷嘴.当它在20 psig压力时整个输出被200立方英尺的空气稀释,气体的浓度接近100 微克每升.内置的调节阀可以调节在2个喷嘴或6个喷嘴去产尘,提供一个宽范围的气体浓度.
TDA-6C气溶胶发生器被*测在流量2000立方英尺每分钟或以下的系统.是理想的工作站,负压过滤单元,生物安全柜,天花过滤模块,小的或可移动的的洁净单元,或HEPA过滤器单元在安装时,合适的干净的压缩空气没来得及供应时.
4, TDA-6C气溶胶发生器技术参数:
4.1 空气悬浮粒子输出范围: 50 - 2,000立方英尺每分钟
4.2 悬浮粒子浓度 100微克 / 升在 200 立方英尺每分钟流量时
4.3 悬浮粒子浓度 10微克 / 升在2,000立方英尺每分钟时流量时
4.4 产生类型 2到6个 Laskin Nozzle 喷头
4.5 压缩空气 不需要,已有内置压缩机
4.6 气体类型 多种直径的粒子 (冷)
4.7 尺寸 (54cm L 28cm W 20cm H)
4.8 重量 25 KG
4.9 电源 120 VAC / 60 Hz 或 220 VAC / 50hz
ATI悬浮粒子发生器 / TDA-6C产尘仪 / 空气粒子发生器 / PAO油发生器 / 过滤器完整性测试系统
英文详细介绍:
Description
The TDA-6C features several improvements including rugged stainless steel construction, large fill port, jet and pressure control, and a 3" standard sanitary fitting outlet. An optional hose adapter, part # 9300100, is available for introducing the aerosol into positive pressure systems.
The TDA-6C is the latest design in rugged, lightweight Laskin nozzle generators from ATI. The TDA-6C is a self-contained aerosol generator that requires only a suitable voltage source to create polydispersed sub-micron oil aerosol.
Features
The TDA-6C has 6 Laskin nozzle jets (Equivalent to 1-1/2 Type III-A Laskin nozzles). When its total output at 20 psig is diluted by 200 cfm of air, the aerosol concentration is approximay 100 ug/l. A valve permits the unit to be operated with either 2 jets (1/2 nozzle) or 6 nozzle jets (1-1/2 nozzles), providing a wide range of aerosol concentrations.
The TDA-6C is recommended for testing systems with airflows of 2,000 cfm and lower. It is ideal for workstations, Negative Pressure Filtration Units, biosafety cabinets, ceiling modules, small or portable cleanrooms, or HEPA filter units in installations where an adequate supply of clean, compressed air is not readily available.
TDA-6C Specifications
Aerosol Output Range: 50-2,000 cfm
Aerosol Concentration 100 ug/1@ 200 cfm
Aerosol Concentration 10 ug/1@ 2,000 cfm
Generator Type: 2 to 6 Laskin nozzle Jets
Aerosol Type: Polydispersed (Cold)
Size: 21" L × 8" W × 11" H (54cm L × 20cm W × 28cm H)
Electrical:
110 VAC / 60 HZ Weight-Pounds (lbs) 55
Weight-Kilograms (kg) 25
220 VAC / 50 HZ Weight-Pounds (lbs) 55
Weight-Kilograms (kg) 25
TDA-6C Aerosol output calculation
The TDA-6C includes a total of 1-1/2 Laskin nozzles. Each "full" nozzle consists of four jets located at the nozzle tip, for a total of six jets. The aerosol concentration depends on the compressed air pressure and flow available for consumption by the nozzle. With 20 psig applied, each jet emits 18.75 slpm of air containing 1,275 ug/l of aerosol. When this aerosol is diluted with 135 cfm of air, the aerosol concentration becomes approximay 25 micrograms per liter. The equation below is for purposes of calculating the aerosol output in micrograms per liter (ug/l) when 20 psig is applied to the nozzle jets.
3,375 x (# of jets being used)
Total airflow (CFM)
NOTE: If more than 20 psig is used, the output concentration will increase and, conversely, if less than 20 psig is used, the output concentration will decrease.
Applications
Clean Rooms
Laminar Flow Benches
Biosafety Cabinets
Glove Boxes
HEPA Vacuum Cleaners
HVAC Systems
HEPA Filters
ULPA Filters
Negative Pressure Filtration Units
Surgical Suites
Nuclear Filter Banks
Collective Protection Filters
Research and Development
Industries
Pharmaceutical
Food Processing
Veterinary Medicine
Laboratories
Asbestos Abatement
Heavy Metal Processors
Nuclear Power and Fuel
Hospitals
Chemical Processing
Certifiers
NBC Defense Agencies
Governmental Labs
Filter Manufacturers
Micro Electronic
Electronic
Biotechnology
Micromechanics
关键词:尘埃粒子计数,悬浮粒子测试仪,颗粒分析,空气粒子,仪器仪表,净化工程,净化车间,净化设备,洁净车间,制药车间,制药机械,制药工程,浮游细菌采样器,风量仪,生物安全柜,净化工作台,洁净工作台,生物工程,生物器材,烘箱,培养箱,干燥箱,实验室设备,实验室工程,检测仪器,气溶胶发生器,气溶胶光度计,悬浮粒子发生器,悬浮粒子光度计,温湿度压差,记录仪,洁净采样车,传递窗,压差计,测振仪,辐照计,微生物检测,工程公司,净化公司,制药公司,生物公司,风淋室,货淋室,称量室,通风柜
制造商:苏州宏瑞源净化科技股份有限公司
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
仪表网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份