保偏光纤跳线 PMC
Polarization-maintaining singlemode fibers guide coupled radiation in two perpendicular principle states with different speeds of propagation, denoted the fast and slow fiber axes.
Linearly polarized radiation not coupled exactly into one of these axes is transformed into an elliptical state of polarization because of these different speeds of propagation.
Polarization-maintaining fibers are either step-index fibers or photonic crystal fibers and the two unequal axes are caused by birefringence from stress-induction components in the fiber cladding, as in "PANDA" fibers, "Bow-Tie" fibers or "Oval-Inner Clad" fibers. The slow axis is orientated in parallel with the stress-inducing elements ("PANDA" and "Bow-Tie" fiber) or in parallel with the larger diameter of the inner cladding ("Oval-Inner Clad" fiber).
The linearly polarized laser radiation is usually coupled into the slow axis, because of its lower sensitivity to fiber bending.
The polarization-maintaining fiber cables made by Sch?fter+Kirchhoff have the fiber axes aligned with the index key of the FC type fiber connector with extremely high precision (<1°).
The fiber cables made by Sch?fter+Kirchhoff typically have a polarization extinction > 200:1 (23 dB) or > 400:1 (26 dB) for λ > 780 nm.
Performance Features:
- Polarization-maintaining singlemode
- Wavelength 360 - 1800 nm
- Mode field diameter 2.3 - 11 μm
- Fiber with low attenuation for wavelengths <460 nm
- FC-APC or FC-PC fiber connector (other connector types available)
- Amagnetic titan connectors available for FC-APC or FC-PC connectors
- Polarization direction is indicated by connector index key
- Optionally: Connectors with end caps for all fibers for reduced power density at the fiber end face (one or both ends)
The three defining parameters of a polarization-maintaining singlemode fiber are numerical aperture NA, mode field diameter MFD and cut-off wavelength λco. Manufacturing tolerances of mean specified values may differ by up to 10%. Carefully selected fibers with characterized values are available on request.
Technical Data
| Curr. No. | Nominal
wave-
length λnom | Cutt-off
wave
length λco | Operational
wavelength
range [nm] | Mode field
diameter
MFD [μm] | Numerical
Aperture
NA [μm] | PM
fiber
type | Order Code |
|---|
| 1 | 360 Si | < 360 | 360–460 | 2.3–3 | 0.12 | P | PMC-360Si-… |
| 2 | 400 Si | < 400 | 400–500 | 2.8–3.5 | 0.11 | P | PMC-400Si-… |
| 3 | 400 Si | < 400 | 400–680 | 2.8–4.8 | 0.11 | P | PMC-400Si-… |
| 4 | 460 Si | < 460 | 460–550 | 3.2–3.9 | 0.11 | P | PMC-460Si-… |
| 5 | 460 Si | < 460 | 460–550 | 4.0–4.7 | 0.09 | P | PMC-460Si-… |
| 6 | 460 | < 460 | 460–630 | 3.2–4.4 | 0.11 | P | PMC-460-… |
| 7 | 530 | < 530 | 530–700 | 4.1–5.4 | 0.10 | P | PMC-530-… |
| 8 | 630 Si | < 630 | 630–780 | 4.4–5.5 | 0.11 | P | PMC-630Si-… |
| 9 | 630 | < 630 | 630–800 | 4.4–5.6 | 0.11 | P | PMC-630-… |
| 10 | 780 | < 780 | 780–1000 | 5.0–6.5 | 0.12 | P | PMC-780-… |
| 11 | 980 | < 980 | 980–1300 | 6.3–8.4 | 0.12 | P | PMC-980-… |
| 12 | 980 | < 980 | 980–1300 | 9.5–12.6 | 0.08 | P | PMC-980-… |
| 13 | 1300 | < 1300 | 1300–1600 | 9.2–11.3 | 0.11 | P | PMC-1300-… |
| 14 | 1550 | < 1550 | 1550–1800 | 10–11.6 | 0.12 | P | PMC-1550-… |
(representative selection)
