W 1000/G W 1000 W 1000/H W 1000/14-Shuttle Kilns, also for Glazing Crucibles for the Solar Industry-安捷来国际股份（香港）有限公司

德国Nabertherm高温炉 > 玻璃W 1000/G W 1000 W 1000/H W 1000/14
Shuttle Kilns, also for Glazing Crucibles for the Solar Industry

Shuttle Kilns, also for Glazing Crucibles for the Solar Industry


W 1500/H	W 8250/S in individual customer-specified measurements for tempering quartz glass

Shuttle kiln W 2060/S according to customer specifications without bogie heating for pre-heating melting molds

Shuttle kiln in customized dimensions for tempering quartz rods

Shuttle kiln W3300 for glazing of melting crucibles in the solar industry

Automatically driven vapour vent flaps

Cooling system for shorter cycle times

W 1000/G - W 10000/14

When cooling, decorating, glazing or sintering special glass during production, bogie hearth furnaces
offer numerous advantages. Due to their very good temperature uniformity, these models are perfectly
suited for burning in a separation layer of silicon nitride in crucibles for the solar industry. The bogie can
be charged outside the kiln. The shuttle can be loaded outside the furnace. Several shuttles can be used,
so that one shuttle can be charged while the other shuttle is in the kiln.

Tmax 900 °C, 1280 °C, 1340 or 1400 °C
Double-walled housing with rear ventilation, provides low shell temperatures
Swing door hinged on the right side
Heating from five sides (four sides and bogie) provides for a uniform temperature distribution
Automatic power connection to the bogie when moved into the furnace
Heating elements mounted on support tubes provide for free radiation and long service life
Floor heating protected by SiC tiles on the bogie providing level stacking surface
Multi-layer insulation consisting of lightweight refractory bricks backed by microporus silica insulation
Self-supporting roof arch
Freely moving shuttle with rubber tires
Adjustable air inlet damper
Manual vapor vent on the furnace roof

Customized dimensions
Additional shuttles
Second door instead of back wall for charging from both sides
Electro-hydraulic lift door
Rail operation for heavy loads
Electrical shuttle drive
Controlled cooling system: the preset cooling curve is carried out exactly via a variable speed fan
Automatically driven vapour vent flaps
Heat protection shuttle to minimize heat loss when the charged shuttle has left the kiln
Multi-zone temperature control for optimal temperature uniformity
Fully automatic process control and documentation
Load weights up to 50 tons
Furnace in HDB design featuring fresh air pre-heating, exhaust gas ventilation and an extensive safety
package for debinding and sintering in one process, i. e. without transfering the
material from the debinding furnace to the sintering furnace.

Model	Tmax	Inner dimensions in mm			Volume	Outer dimensions in mm			Supply	Electrical	Weight
	°C	w	d	h	in l	W	D	H	power/kW	connections*	in kg
W 1000/G	900	800	1600	800	1000	1400	2350	1880	40	3-phase	3000
W 1500/G	900	900	1900	900	1500	1500	2650	2010	57	3-phase	3500
W 2200/G	900	1000	2200	1000	2200	1600	2950	2120	75	3-phase	4000
W 3300/G	900	1000	2800	1200	3300	1600	3550	2320	110	3-phase	5300
W 3828/G	900	1100	2900	1200	3828	1770	3710	2260	120	3-phase	6100
W 5000/G	900	1000	3600	1400	5000	1600	4350	2520	140	3-phase	7500
W 7500/G	900	1000	5400	1400	7500	1600	6150	2520	185	3-phase	9100
W 10000/G	900	1000	7100	1400	10000	1600	7850	2520	275	3-phase	11000

W 1000	1280	800	1600	800	1000	1470	2400	1820	57	3-phase	3000
W 1500	1280	900	1900	900	1500	1570	2700	2010	75	3-phase	3500
W 2200	1280	1000	2200	1000	2200	1670	3000	2120	110	3-phase	4000
W 3300	1280	1000	2800	1200	3300	1670	3600	2320	140	3-phase	5300
W 3828	900	1100	2900	1200	3828	1770	3710	2260	150	3-phase	6100
W 5000	1280	1000	3600	1400	5000	1670	4400	2520	185	3-phase	7500
W 7500	1280	1000	5400	1400	7500	1670	6200	2520	275	3-phase	9100
W 10000	1280	1000	7100	1400	10000	1670	7900	2520	300	3-phase	11000

W 1000/H	1340	800	1600	800	1000	1470	2400	1880	75	3-phase	3500
W 1500/H	1340	900	1900	900	1500	1570	2700	2010	110	3-phase	3800
W 2200/H	1340	1000	2200	1000	2200	1670	3000	2120	140	3-phase	4400
W 3300/H	1340	1000	2800	1200	3300	1670	3600	2320	185	3-phase	5500
W 3828/H	900	1100	2900	1200	3828	1770	3710	2260	200	3-phase	6100
W 5000/H	1340	1000	3600	1400	5000	1670	4400	2520	235	3-phase	8000
W 7500/H	1340	1000	5400	1400	7500	1670	6200	2520	370	3-phase	10000
W 10000/H	1340	1000	7100	1400	10000	1670	7900	2520	440	3-phase	12000

W 1000/14	1400	800	1600	800	1000	1470	2400	1880	75	3-phase	3500
W 1500/14	1400	900	1900	900	1500	1570	2700	2010	110	3-phase	3800
W 2200/14	1400	1000	2200	1000	2200	1670	3000	2120	140	3-phase	4400
W 3300/14	1400	1000	2800	1200	3300	1670	3600	2320	185	3-phase	5500
W 3828/14	900	1100	2900	1200	3828	1770	3710	2260	200	3-phase	6100
W 5000/14	1400	1000	3600	1400	5000	1670	4400	2520	235	3-phase	8000
W 7500/14	1400	1000	5400	1400	7500	1670	6200	2520	370	3-phase	10000
W 10000/14	1400	1000	7100	1400	10000	1670	7900	2520	440	3-phase	12500
*Please see page 42 for more information about mains voltage

诚招区域总代理
安捷来国际股份公司作为仪器设备领域的专业公司，创业多年，集科、工、贸为一体，在香港设立安捷来国际股份（香港）有限公司，在中国大陆设立北京安捷来勒科技有限公司（注册资本1000万）、珠海安捷来科学仪器有限公司等子公司，并陆续在国内各大城市建立营销及售后服务网络。为了更好地服务于珠江三角洲地区及国内客户，珠海安捷来科学仪器有限公司在提供上等的进口仪器的同时采用国际**的生产技术生产各种高品质的环境试验仪器。
主营产品：日本TAITEC多功能分液漏斗振荡器SR-2DW/2DS，试管浓缩仪TC-8F，微孔板·多孔板振荡器E-36等振荡类&生物类仪器；日本YAMATO高压**器、高温炉及干燥箱等常规科学仪器；美国PROTON气体发生器等；还即将加入更多上等产品。
目前，公司为进一步扩展国内市场，特向国内各地正在成长中的公司及个人诚招部分产品的区域总代理。诚挚欢迎您，。
联系电话：/12/13
：info
详情请进入 .cn

希望你我的合作将共同搭建一个幸福的桥梁！进口品牌十年保证只做优异坚守品质！诚信**、互利共赢！

注：1、申请需提供公司三证、经营品牌及经营状况、负责人个人简历等资料。
2、我公司将于2013年10月23日-26日，在北京展览馆举行的第十五届北京分析测学术报告会及展览会（2013BCEIA）上展示部分展品，有兴趣者，欢迎前往参观，3号馆3014、3031展位。