| 注册| 产品展厅| 收藏该商铺

行业产品

当前位置:
陕西南业电力设备有限公司>>高压避雷器>> HY5WX-51/134高压避雷器厂家

HY5WX-51/134高压避雷器厂家

返回列表页
  • HY5WX-51/134高压避雷器厂家
  • HY5WX-51/134高压避雷器厂家
  • HY5WX-51/134高压避雷器厂家
  • HY5WX-51/134高压避雷器厂家
  • HY5WX-51/134高压避雷器厂家
收藏
举报
参考价 面议
具体成交价以合同协议为准
  • 型号
  • 品牌
  • 厂商性质 生产商
  • 所在地 西安市
在线询价 收藏产品 加入对比

联系方式:王凯龙查看联系方式

更新时间:2021/02/23 09:29:36浏览次数:181

联系我们时请说明是仪表网上看到的信息,谢谢!

同类优质产品

更多产品

产品简介

产地 国产 加工定制
HY5WX-51/134线路型高压避雷器是一种为各种电子设备、仪器仪表、通讯线路提供安全防护的电子装置。当电气回路或者通信线路中因为外界的干扰突然产生尖峰电流或者电压时,浪涌保护器能在极短的时间内导通分流,从而避免浪涌对回路中其他设备的损害。HY5WX-51/134高压避雷器厂家

详细介绍

一、概述
   交流输变电线路用有机复合外套氧化锌避雷器并联连接于绝缘子(串)的两端,是为了限制线路雷电过电压,提高线路的耐雷击水平,降低系统因雷击故障引起的跳闸率而专门设计的一种新型避雷器。安装方式主要为悬挂式(悬挂于输电杆塔上),也可座桩式安装。本公司生产的线路用复合外套金属氧化锌避雷器(悬挂式、座桩式)主要用于10~220kv交流电力输变电系统中,用来限制输变电线路可能出现的各种过电压,以保证输变电线路的安全运行。 HY5WX-51/134高压避雷器厂家
    产品生产执行的标准为GB11032-2000(eqv IEC60099-4:1991)《交流无间隙金属氧化物避雷器》、JB/T8952-2005《交流系统用复合外套无间隙金属氧化物避雷器》、JB/T10497-2005《交流输电线路用复合外套用串联间隙金属氧化物避雷器》、JB/T8459-2006《避雷器产品型号编制方法》。HY5WX-51/134高压避雷器厂家


二、产品特点
    1.整体模压成型,密封性能好,结构特殊,防潮防爆;
    2.散热性能好,具有较大的过电压吸收能力;
    3.体积小重量轻,安装灵活耐碰撞,抗拉强度高,运输无破损。
    4.适宜安装在耐雷水平较低雷击跳闸率偏高的输电线路;干旱少雨的丘陵、山区;接地电阻较高的杆塔、大跨距的过江杆塔;操作过电压较高,需要对进入变电站前进行限制的场合;严重污秽的地区。


三、使用条件
    1.环境温度为:-40℃~+40℃;
    2.海拔高度不超过2000m(高原地区订货时应说明);
    3.电源频率为48Hz~62Hz;
    4.大风速不超过35m/s;
    5.地震裂度7度及以下地区;
    6.避雷器允许摆动,根据塔形,考虑悬挂方式及座桩方式。

I. overview

The organic compound coated zinc oxide arrester used in AC transmission lines is connected in parallel to the two ends of insulators (series). It is a new type of arrester specially designed to limit lightning overvoltage of lines, improve lightning resistance level of lines and reduce tripping rate of systems caused by lightning faults. Installation mode is mainly suspended (suspended on transmission tower) or pile-type installation. The compound coat metal zinc oxide arrester (suspension type, pile type) produced by our company is mainly used in 10-220 kV AC power transmission and transformation system, which is used to limit various kinds of overvoltages that may occur in transmission and transformation lines, so as to ensure the safe operation of transmission and transformation lines.

The standards for product production implementation are GB11032-2000 (eqv IEC 60099-4:1991), "AC Gapless Metal Oxide Arrester", "JB/T8952-2005" Composite Coat Gapless Metal Oxide Arrester for AC System","JB/T10497-2005"Composite Coat Series Gap Metal Oxide Arrester for AC Transmission Line", "JB/T8459-2006" Method for Making Product Types of Arrester.

II. Product Characteristics

1. Integral moulding, good sealing performance, special structure, moisture-proof and explosion-proof;

2. It has good heat dissipation performance and large over-voltage absorption capacity.

3. Small size, light weight, flexible installation, anti-collision, high tensile strength, no damage to transport.

4. It is most suitable to install transmission lines with low lightning resistance and high lightning trip-out rate; hilly and mountainous areas with drought and little rain; poles with high grounding resistance and long-span river-crossing poles; occasions with high operating overvoltage, which require restrictions before entering substations; and areas with serious pollution

III. Conditions of Use

1. The ambient temperature is -40 +40.

2. The altitude should not exceed 2000m.

3. The frequency of power supply is 48 Hz~62 Hz.

4. The maximum wind speed does not exceed 35m/s.

5. Areas with seismic fissure of 7 degrees or less;

6. Lightning arrester is allowed to swing. According to tower shape, suspension mode and pile-sitting mode are considered.

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~