当前位置：东莞市塘厦和兴电子仪器经营部>>>>现款上门交易安立MS8604A二手测试仪

现款上门交易安立MS8604A二手测试仪

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号MS8604A

品牌

厂商性质经销商

所在地东莞市

在线询价收藏产品

联系方式：陈嘉伟查看联系方式

更新时间：2016-08-25 15:00:16浏览次数：50次

联系我时，请告知来自仪表网

产品分类 品牌分类

  Fluke/福禄克
  Agilent/安捷伦

东莞市塘厦和兴电子仪器经营部

经营模式：经销商

商铺产品：195条

所在地区：广东东莞市

联系人：陈嘉伟（经理）

询价 给他留言

产品简介

现款上门交易安立MS8604A二手测试仪
100Hz~8.5GHz
?由单一系统评估主发射机功能
?与NADC,PDC,PHS,数字MCA, GSM, DCS1800（PCN）, CT2, DECT,WCPE,PACS,RCR STD-39 TETRA系统及GMSK和π/4 DQPSK通用测量软件相兼容;
?高速测量（调制精度测量小于1s）
?输入共10W（内部有用于高功率测量的20dB衰减器

详细介绍

大量回收安立MS8604A测试仪

东莞市和兴电子仪器有限公司

: 陈嘉伟（业务) 陈志强（）

手机/:/

:/2284351030

阿里旺旺：生苹果手表店

电子：

地址：广东省东莞市塘厦镇塘厦大道63号

本公司有大量二手/全新仪器库存，并*回收/出售，网络分析仪，频谱分析仪，综合测试仪，LCR电桥，示波器，信号源，功率计，电源，天馈线分析仪，功率计， GPIB卡，音频分析仪　，电视信号发生器，LCR电桥，万用表，电子负载，等等二手高档仪器。

寻*合作伙伴

陈期待和您合作

诚信做人,诚意做事就找和兴(和兴电子仪器陈嘉伟）

详情: 陈

如果您找不到请搜索：东莞市和兴电子仪器有限公司

现款上门交易安立MS8604A二手测试仪

特点
?100Hz~8.5GHz
?由单一系统评估主发射机功能
?与NADC,PDC,PHS,数字MCA, GSM, DCS1800(PCN), CT2, DECT,WCPE,PACS,RCR STD-39 TETRA系统及GMSK和π/4 DQPSK通用测量软件相兼容;
?高速测量(调制精度测量小于1s)
?输入共10W(内部有用于高功率测量的20dB衰减器及功率计
技术指标

General		Frequency range	100Hz to 8.5GHz
		Maz.input level (continuous wave average power)	+40dBm(10W)
		Reference oscillator	Frequency:10MHz Starting characteristics:≤5×0.00000001/day(option:≤2×0.00000001/day after30 min.warm-up) After 10min.of warm-up,compared to the frequency after 24-hour warm-up Aging rate:≤2×0.00000001/day(option:≤5×0.000000001/year) Compared to the frequency after 24-hour warm-up Temperature characteristics:5×0.00000001/day(option:3×0.00000001/day) *0to 50℃,relative to the frequency at 25℃
Spectrum anallyzer		Frequency	Setting range:100Hz to 8.5GHz(resolution:1Hz),0to 2GHz(freq.band:0),1.7to7.5GHz(freq.band:1-),6.5to 8.5GHz(freq.band:1+) Preselector range:1.7to 8.5GHz (bands:1-/1+) Display accuracy:±(display freq.×reference freq.accuracy+span×span accuracy) Span Setting range:0Hz,100Hz to 8.5GHz Accuracy: ±2.5%(span≥1kHz),±5%(100Hz≤span<1kHz) RBW Setting range:10Hz to 3MHz(3dB),1-3serqence Accuracy:±20% Selectivity(60/3dB);≤15:1(100kHz to 3MHz),≤12:1(10Hz to 30kHz) VBW:1Hz to 3MHz,off,1-3 seqrence Signal purity(SSB,1MHz to 4GHz): ≤-100dBc/Hz(10kHz offset,≤-115dBc/Hz(50kHz offset),≤-120dBc/Hz(100kHzoffset)
Spec- trum analyzer	Ampl- itude	Level	Level measuring range:Average:Average noiselevl to +40dBm Average noise level:≤-112dBm(10MHz to 8.5Ghz,RBW 10Hz,VBW 1Hz,input att.setting20dB) Residual reponse:≤-75dBm(1MHz to 8.5GHz,input att.setting 20dB)
		Reference level	Setting range:-80to +40dBm Accuracy:±0.5dB(-30to +20dBm),±0.75dB(-40to -30dBm,+20to +40dBm),±1.5dB(-60to-40dBm) *After calibration and at freq.100Mhz,span≤2MHz,and in auto mode for inputatt ,RBW,VBW and sweep time settings RBW switching error(after calibration):±0.3dB(RBW:≤300kHz),
		Frequency reponse	±0.5dB(100MHz to 2GHz,band:0),±1dB(1.7to8.5GHz,bands:1-/1+)
		Linearity( after calibration)	LOG:±0.3dB(0to -20dB,RBW:≤100kHz),±1.5dB(0to-80dB,RBW≤10kHz) LIN:±5%(to reference level)
		Dynamic range	2nd harmonics: ≤-70dBc(5to 800MHz,band:0,mixer input level:-30dBm) ≤-80dBc(800to 850MHz,band:0,mixer input level:-30dBm), ≤-90dBc(850MHz to 2.1GHz,bands:1-,mixer input level:-10dBm) Two-signal third-ouder intermodulation distortion:≤-70dBc(10to 50MHz),≤-85dBc(50MHzto 2.1GHz) *Frequency difference between two signals≥50kHz,mixer input level:-30dBm
		Sweep	Sweep time Setting range:20ms to 1000s(TRACE-FREQ,data points:NORMAL),50ms to 1000s at other conditions Accuracy:±10%(20ms to 200s),±15%(200 to 1000s) Sweep mode:CONTINUOUS,SINGLE Trigger:FREE RUN,TRIGGERED Trigger source:VIDEO,LINE,EXT(±10V),EXT(TTL) Gate mode(OFF,random sweep mode) GATE DELAY:0to 65.5ms(in 1μs steps,GATE END:INT) GATE END:INT/EXT
		Time domain waveform display	Sweep fime:50,100to 900μs(data point:NORMAL,Onemost significant digit can be set.) 1ms to 1000s(data point:NORMAL,Two most significant digits can be set) 100,200to800μs(data point:DOUBLE,One most significant digit can be set aseven number.) 1ms to 1000s(data point:DOUBLE,Two most significant digits can be set aseven number.) Delay time Pre-trigger.-time span to 0s(in 1point steps) Post trgger:0to 65.5ms(in 1μssteps) Amplitude display resolution:50μsto 49ms,10bits*0.1%of full scale) 50ms to 1000s,14bits(0.01%of full scale)
		Detection mode	POS PEAK,SAMPLE,NEG PEAK
		Number of points	NOUMAL:501 points,DOUBLE:1002points
		AM/FM demodu- lation	Demodulated waveform display and monitoringdemodulated audio signal with internal speaker
		Auxiliary inputs/ outputs	IF output21.4MHz:-10dBm±2dB(at top of screen,with output terminated by 50Ωteminator),BNC connector Youtput:0to 0.5V±0.1V(at range between top and bottom of screen,LOG:10dB/div,LIN:10%/div,100MHz and with output terminated by 75Ω terminator),BNC connector External trgger input Input1:max.±10V(in 0.1V steps, rising/falling edges selectable and pulse width≥10μs),BNC connector Input2:TTL level(rising/falling edges selectable and pulse width≥10μs, )BNC connector
Power meter	Frequency range		100kHz to 5.5GHz
	Level range		-20to +20dBm
	Instrumentation accuracy		±0.5%
	Zero set		±0.5% of full scale at most sensitive range(100μW range)
	Zero shift between ranges		±0.2% of full scale zero setting at mostsensitive range
	Calibration oscillator		Freq:50MHz,Output:1.00mW,Accuracy:±1.2%
	Applicable power sensor		MA4601A
Others	Display		640×400dot,9-inch EL
	Inputs/outputs on rear panel		Reference input:10MHz±10Hz,2to 5Vp-p, ≥50Ω,BNC connector Reference buffer output:10MHz,2to 3Vp-p(with the output terminated by 200Ω terminator),BNC connector Separate video output:Compatible with 8-pin DIN connector
	External memory		One slot for can be connected
	Save/recall		Internal memory(4sets of spectrum and Tx test conditions),can save/recall setting conditions at extemal memory(PMC)
	Direct plotting		Can hard-copy screen via GPIB2
	External control	GPIB1 (IEEE488.2)	As device controlled by host,all functions except power swetch Controls other instruments as controller using PTA SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1, C0(C1,C2,C3,and C24with PTA)
		GPIB2 (IEEE488.1)	Controls other instruments as controller SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1 ,C1,C2,C3,C4,C28
		I/O port	Output port A/B:8-bit(TTL level), Input/Output port C/C:4-bit(TTL level), EXclusive port:3-bit(TTL level) Control signal:4(TTL level),+5V output:Max.50mA
		RS-232C (Option 02)	Controls other instruments as controller
	PTA	Language	PTL:High level languaeg interpreter based on BASIC
		Programming	Using external keyboard
		Program memory	On PMC or FD Upload/download from/to PC
		Programming capacity	900KB
Operating temperature			0°to 50℃
Power			85to 132/170 to 250Vac,47.5 to 63Hz ,≤500VA
Dimensions and mass			426(W)×221.5(H)×451(D)mm,≤27kg
EMC*1			EN55011:1991,Group1,ClassA EN50082-1:1992
Safety			EN61010-1:1993(Installation CategoryII ,Pollution DegreeII)

订货信息

Applicable system	Measurement software	Application software(supplied by PMC)
PDC	Option11	MX3512A
PHS	Option12
NADC	Option13
Digital MCA	Option14	MX3513A
GSM	Option15	MX3518A
DC1800(PCN)		MX3518A
DECt		MX3519A
CT2		MX3520A
General-purpose GMSK		-
WCPE	Option16	-
RCR STD-39
PACS
TETRA
General-purposeπ/4 DQPSK