行业产品

  • 行业产品

江苏春晨电缆有限公司


当前位置:江苏春晨电缆有限公司>>充电桩电缆>>EV-EFPF充电系统电缆>>EV-EFPF充电系统电缆-电气设备用电缆

EV-EFPF充电系统电缆-电气设备用电缆

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质生产商

所  在  地淮安市

联系方式:赵礼春查看联系方式

更新时间:2017-07-09 06:06:01浏览次数:300次

联系我时,请告知来自 仪表网

产品简介
产地 国产 防护等级 其他
加工定制 外表材质 其他
线芯材质 其他 应用范围 电力系统

江苏春晨电缆有限公司专业生产EV-EFPF充电系统电缆,乙丙橡胶绝缘铜丝编织屏蔽氯丁橡胶(或类似材料)护套电动汽车传导充电系统用电缆,

详细介绍

江苏春晨电缆有限公司专业生产EV-EFPF充电系统电缆,乙丙橡胶绝缘铜丝编织屏蔽氯丁橡胶(或类似材料)护套电动汽车传导充电系统用电缆,

在电线电缆的生产中,由于其原材料成本占生产成本的80%以上,而铜、铝、钢芯、橡胶、塑料和护套等材料又为原材料成本的主体,这就要求电线电缆企业在如何设计有特色的产品、节约原材料、开发新型环保材料等方面下功夫。因此,今后必须考虑以下措施,来打造电线电缆行业的循环经济:EV-EFPF充电系统电缆

In wire and cable production, because of the cost of raw materials accounted for more than 80% of production costs, while copper, aluminum, steel, rubber, plastic and core sheath material as the main raw material costs, which requires the wire and cable enterprises in how to design unique products, saving raw materials, development of new environmentally friendly materials so hard. Therefore, the following measures must be taken in the future to create a recycling economy in the wire and cable industry:

首先,淘汰冷轧机和黑铜杆。用冷轧机轧制出芰8黑铜杆的生产工艺是落后的,而且其黑铜杆氧化物含量高,导电率低,性能差,拉力重量比小,耗材、耗能、污染严重,应该淘汰。

First, the cold rolling mill and the black copper rod. With the rolling mill production process, 8 black copper rod is backward, and the black copper oxide content of high conductivity, low tension, poor performance, weight ratio of small, material and energy consumption and serious pollution should be eliminated.

其次,积极推广铝稀土优化处理技术。 用连铸连轧工艺生产电工铝杆在国内已相当普及,性能也良好,但设备仍停留在70年代初期开发水平,技术上没有多大创新。要积极推广我国*的铝稀土优化处理技术。并利用引进的部分关键设备和技术添加铝锆合金,将熔铝燃煤炉改造成熔铝燃油或天然气炉,全部消除熔铝燃煤炉燃煤烟尘和烟气的排放,并设置烟气过滤装置净化烟气,提高排放质量,提高成品率,降低成本,同时使导线工作温度从70℃提高到150℃,载流量提高1.6倍。

Second, actively promote the optimization of rare earth aluminum processing technology. Continuous casting and rolling process for the production of electrical aluminum rod in the country has been quite popular, the performance is also good, but the equipment is still in the early 70s, the development of the level of technology is not much innovation. To actively promote China's unique aluminum rare earth optimization technology. The introduction of the key part and the use of special equipment and technology of aluminum zirconium alloy, the aluminum melting stove into molten aluminum fuel oil or natural gas furnace, the total elimination of aluminum melting stove coal smoke and flue gas emissions, and set the flue gas purification device of flue gas emissions, improve quality, improve the yield and reduce the cost at the same time. The wire temperature is increased from 70 to 150 DEG C., carrying capacity is increased by 1.6 times.

第三,积极引进技术,自主创新开发性能优良的电线电缆设备。目前,电线电缆主导产品的关键生产设备与*进设备比较,技术水平差距仍然很大,主要表现在生产率低、自动化程度不高、能耗较大、可靠性较差,还不能满足行业发展的需要,消化吸收严重滞后。电线电缆设备的技术水平、性能和可靠性对于提高电线电缆产品质量、生产效率、材料利用率均有不可估量的好处。要积极引进技术,自主创新开发性能优良、高水平的电线电缆设备,为打造电线电缆行业的循环经济服务。 zui后,积极开发环保型电线电缆产品,加强废电线电缆产品的回收工作。 目前,生产电线电缆产品大量使用橡胶、聚氯乙烯、聚乙烯等高分子化工材料。在生产电线电缆产品过程中产生大量有毒有害气体。因此要积极开发环保型电线电缆原材料,生产产品环保型电线电缆。日本藤仓等电缆公司在开发了环保型电线电缆产品后,为了垄断市场,积极推进政府颁布环保型电线电缆产品标准。近年来,环保型电线电缆产品的销售份额急剧扩大,普通的电线电缆和阻燃电线电缆根本无法与其竞争。 在电线电缆生产过程中产生的边角余料,可以直接回收回用。建议成立专业的“聚氯乙烯”废料回收处理厂,定点加工,改作他用,避免产生二次污染。

Third, the introduction of technology, independent innovation and development of excellent performance of wire and cable equipment. At present, wire and cable products led the key production equipment and advanced equipment, technical level is still a big gap, mainly in low productivity, low degree of automation, high energy consumption, poor reliability, can not meet the needs of the development of the industry, digestion and absorption lag. The technical level, performance and reliability of wire and cable special equipment can improve the quality, production efficiency and material utilization rate of wire and cable products. To actively introduce technology, independent innovation and development of excellent performance, high level of special equipment for wire and cable, wire and cable industry to create a recycling economy services. Finally, actively develop environmentally friendly wire and cable products, strengthen the recycling of waste wire and cable products. At present, the production of wire and cable products, rubber, polyvinyl chloride, polyethylene and other high polymer chemical materials. In the production of wire and cable products in the process of generating a large number of toxic and harmful gases. Therefore, it is necessary to actively develop environment-friendly wire and cable raw materials, production of environmentally friendly wire and cable. Japan's Fujikura cable companies in the development of the environmental protection type of wire and cable products, in order to monopolize the market, and actively promote the government environmental protection type of wire and cable products standards. In recent years, the sales share of environment-friendly wire and cable products has expanded rapidly, and the ordinary wire and cable and flame retardant wire and cable can not compete with them. In the production of wire and cable in the production process of the side of the residual material, can be directly recycled. Recommended the establishment of a professional "PVC" waste recycling plant, fixed-point processing, used for other purposes, to avoid pollution two.

关键词:天然气 标准

感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

仪表网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.ybzhan.cn,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,仪表网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~