COMPLIANCE STANDARDS:
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31
IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-31 & IEC 60529
UL514B, UL1203, ANSI/UL 60079-0/7, ISA 60079-31
CABLE GLAND SELECTION TABLE
(ALL DIMENSIONS IN mm)
20S M20x1.5，NPT3/4"or 1/2, Flat Width：6.3-11.7mm，Thickness：4.0-7.0mm
20S M25x1.5，NPT3/4"or 1/2，Flat Width：6.3-11.7mm，Thickness：4.0-7.0mm
20R M20x1.5，NPT3/4"or 1/2, Flat Width：8.1-13.5mm，Thickness：5.8-6.2mm
20R M25x1.5，NPT3/4"or 1/2，Flat Width：8.1-13.5mm，Thickness：5.8-6.2mm
20 M20x1.5，NPT3/4"or 1/2, Flat Width：10.3-13.5mm，Thickness：5.6-9.0mm
20 M25x1.5，NPT3/4"or 1/2，Flat Width：10.3-13.5mm，Thickness：5.6-9.0mm
25 M25x1.5，NPT3/4"or 1/2，Flat Width：10.6-16.2mm，Thickness：4.0-7.0mm
** Size 25mm is only currently ATEX, IECEx, INMETRO, EAC and Ukraine certified.
• Gland size does not necessarily equate to the entry thread size.
• Dimensions (A) & (B) may differ for glands with non metric entry threads.
Please refer to our “Thread Reference Tables" for specific dimensions.
• Assembly instructions must be read prior to installation and adhered to in full.
• Peppers supply products with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length
Peppers Cable Glands Limited will not be held responsible for clients’
installations where this has not been taken into account.
• When selecting IP Washer material for gland kits, please be aware of the accessories temperature range to ensure they are suitable for the intended installation.
• Where approval in addition to ATEX, IECEx and CSA is required, this must be clearly requested at time of enquiry / order.
Peppers防爆格兰主要特点：
