深圳市北汉科技有限公司
CBA 100M-400
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
Description
This low frequency amplifier can be used in conjunction with other amplifiers from the Teseq range to cover the entire frequency range from 10 kHz to 40 GHz with convenient frequency break points allowing you to optimise the power level in each range.
The Class A design ensures a high reliability, low distortion linear performance across the frequency range. This design also ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output.
The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans, and is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. Front panel indicators are provided to indicate over-temperature and rf interlock operation.
Parameter | Value |
---|---|
Frequency range (instantaneous) | 0.01 to 100 MHz |
Rated output power | 400 W minimum (500 W typical) |
Output power at 1 dB gain compression | 300 W minimum (400 W typical) |
Gain | 57 dB |
Harmonics at 250 W output power | Better than -20 dBc |
Power Supply Voltage | 184-264 VAC |
Power Supply Phases | 1 (opt 2) |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
仪表网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份