1.功能特点
1、外型美观大方，选材考究，制作精良，结构合理，故障率低
1. Features
1 It is beautiful and elegant, well-made and well-structured with special material and low failure rate.
2、整个过程操作简单，只需将装有试样的氧弹充氧后放入量热仪内，试验自动完成。
2 It is quite easy in operation in the whole process and just by adding the oxygen bomb filled with oxygen and samples into the calorimeter, then the experiment can be automatically completed.
3、采用双筒结构往内桶中注水，有效的避免了注水后因水位过高溢出的现象。
3 Injecting water into the inner barrels by means of binoculars effectively avoids the overflow phenomenon due to high water level.
2 .技术参数
测温范围：0~40℃（每次测定室温变化应≤1℃）相对湿度≤85%
温度分辨率：0.0001℃
测试时间：点火初期6分钟平衡水温。点火后12分钟测试主期温度，全程实验时间18---20分钟（煤样热量低实验时间相对延长）。
2. Technical parameters
Temperature range: 0 ~ 40 ℃ (every temperature change should be≤1 ℃)
Relative humidity ≤85%
Temperature resolution: 0.0001 ℃
Test time: it takes 6 minutes for temperature balance in early ignition. The main temperature will be measured after 12 minutes of ignition and the entire experiment lasts from 18 to 20 minutes (coal heat is low and the test time can be relatively extended).摘自：北京鑫生卓锐科技有限公司技术服务部。
