进入展台 在线留言

欢迎联系我

有什么可以帮您？在线咨询

破裂强度试验机显示板使用说明书



资料类型


文件大小


浏览次数
3290次


上传时间
2008年12月27日

关键词: 破裂机,拉力机,环压机

上传者: 东莞市高鑫检测设备有限公司

资料简介

FA1761F/FA3861F USER’S GUIDE P.0

Table of contents

■General description--------------------------------------------------------------------1

■FA1761F--------------------------------------------------------------------------------------1

■FA3861F--------------------------------------------------------------------------------------1

■Common specifications--------------------------------------------------------------1

■Dimension of FA1761F----------------------------------------------------------------2

■Dimension of FA3861F----------------------------------------------------------------2

■Installation ---------------------------------------------------------------------------------2

■Illustration of front panel----------------------------------------------------------- 3

■Installation place----------------------------------------------------------------------- 4

■Installation method------------------------------------------------------------------------------- 4

■Power line and ground connections ----------------------------------------- 4

■ON/OFF output and PID control output connections----------------- 5

■Communication connections----------------------------------------------------- 5

■Initial set------------------------------------------------------------------------------------ 6

■Key functions in running------------------------------------------------------------ 6

■Over temp. display----------------------------------------------------------------------7

■Under temp. display--------------------------------------------------------------------7

■ON/OFF of key-lock---------------------------------------------------------------------7

■Auto-tuning---------------------------------------------------------------------------------7

■PID control display---------------------------------------------------------------------7FA1761F/FA3861F USER’S GUIDE P.1

General description

The FA1761F/FA3861F is a temperature- humidity controller for the dry/wet bulb system without transducer。

FA1761F

Name ：Temperature controller

Model ：FA1761F（Recorder output include）

Input ：Pt100Ω

Accuracy：±0.3℃

Setting range：SCLL -99.0~0.0℃

SCLH 10.0~200.0℃

Display range：-99.9~210.0℃

FA3861F

Name ：Humidity controller

Model ：FA3861F（Recorder output include）

Input ：Pt100Ω

Accuracy：±1％

Setting range：SCLL 0.0~40.0﹪

SCLH 60.0~100.0﹪

Common specifications

Display：PV 8㎜ red LED

SV 8㎜ green LED

（7 segments，4 character positions）

Display cycle：1 sec.

Control：PID（SSR） + ON/OFF + ON/OFF

Output ：PID output－SSR

ON/OFF output－relay contact output

Action mode：reverse（low）/direct（high）

Proportional band：0.0~50.0℃/﹪

Integral time：0~99min.59 sec.

Derivative time：0~99min.59sec.

Control cycle：1~30 sec.

Hysteresis of alarm：0.1~ 2.5℃/﹪

Deviation setting：±30.0℃/﹪

Recorder output：SCLL~SCLH──DC 4~20mA

Power voltage：AC100 / 110V ±10﹪or

AC200 / 220V ±10﹪ 50 / 60Hz 4VA

Memory backup：approx.10 years（at 23℃±2℃，55±10％RH，for standard model）

Dimensions：（H）96 （W）48 （D）129㎜

Panel cutout：（H）90±0.5 （W）43±0.5㎜

Weight：approx.500g

Standard Accessory：mounting 2pcs/1set

FA1761F/FA3861F USER’S GUIDE P.2

Dimension of FA1761F

Dimension of FA3861F

Installation

■1 set ■N sets

FA1761F/FA3861F USER’S GUIDE P.3

Illustration of front panel

（1） 4 character red LED：Display of PV。When we want to key-in a value，the position glittered with this value. If display＝HHHH，it means the present value（PV）is higher than 『SCLH』；If display＝LLLL，it means the present value（PV）is lower than 『SCLL』。

（2） 4 character green LED：Display of SV。When we want to key-in a value，the position glittered with this value.SV and percent of PID output are changeable。

（3） Display of output1：Light lamped when output1 is ON。

（4） Display of output2：Light lamped when output2 is ON。

（5） Display of output3：Light lamped when output3 is ON。

（6） Display of communication：It’ll check automatically once every second.（Communicate status between FA1761F and FA3861F），if the status is OK，it glittered with lamp。

（7） Function key：We can change the display mode by pressing this key。

（8） Left key：For input position moving。

（9） Up key：Increase value or function select。

（10） Down key：Reduce value or function select。

（11） Unit：Temperature（FA1761F）-℃；Humidity（FA3861F）-﹪。

FA1761F/FA3861F USER’S GUIDE P.4

Installation place

■Place where an ambient temperature is 0 to 40℃，and relative humidity is 80﹪RH or less。

■Place where no water splash and non-condensing develop。

■Place where no direct sunshine exist。

■Place where is clear and dust or corrosive gas are not present。

■Place where is far from noise-generating devices such as heavy duty solenoid switches and phase control SCRs。

Installation method

■Insert the FA1761F/FA3861F unit from through the cutout on the panel。

■Secure two claws of the mounting brackets to the holes on the side panel of the unit。

■Tighten the screws for the mounting brackets to secure the units。

Power line and ground connections

■The power line and ground connections are made at the FA1761F/FA3861F’s terminal board。

■The FA1761F/FA3861F is designed to operate on 100/110VAC or 200/220VAC 50/60Hz power line。

■Make sure to connect the G（ground）terminal to the earth to minimize external interference。

■For AC100V or AC110V。 ■For AC200V or AC220V。

FA1761F/FA3861F USER’S GUIDE P.5

ON/OFF output and PID control output connections

Communication connections

FA1761F/FA3861F USER’S GUIDE P.6

Initial set

This item contains setting range selection、offset adjust、action mode selection（reverse or direct）。

The initial set display is shown from the normal display by simultaneously pressing the two keys： and for a while，at the same time，PID output＝OFF。

Under this status，It will change by pressing key in sequence as below：

Display	Name	Function
SCLL	Scale Low	The low limit value of setting for Temp. or Humi.
SCLH	Scale High	The high limit value of setting for Temp. or Humi.
oFFS	Offset Adjust	Range：±5.0。 Example：If deviation value＝+1，input value＝-1。
cycL	Cycle Time	Range：1~30 sec.。
LMTL	Limit Low	The low limit value of PID output。 Range：0~30。
LMTH	Limit High	The high limit value of PID output。 Range：70~100。
PID	PID Zone	The cut point of PID zone。（2 parts）
SEt	Set Method	AbSo(Absolute)/DeviationdEU1 selection of output2 and output3。
oPEr	Operate Mode	cont(Control)/ALAr(Alarm) selection of output2 and output3。
out1	Out1	HigH(High)/Louu(Low) selection of output1。
out2	Out2	HigH(High)/Louu(Low) selection of output2。（When operate mode＝Alarm，it decided automatically）
out3	Out3	HigH(High)/Louu(Low) selection of output3。（When operate mode＝Alarm，it decided automatically）
uuEt	Wet	Temperature display of wet bulb。
Loc	Loc	Lock function selection。
tyPE	Type	Display of controller’s model。

Key functions in running

Green LED：It will change by pressing key in sequence as below：（In running）
→Set1→Pb L→It L→dt L→Pb H→It H→dt H→Set2→diF2→SEt3→diF3

FA1761F/FA3861F USER’S GUIDE P.7

Display	Name	Function
SEt1	Set 1	Setting of output1
Pb L	Proportional Band Low	Setting of P（Low）
It L	Reset Time Low	Setting of I（Low）
dt L	Reset Time Low	Setting of d（Low）
Pb H	Proportional Band High	Setting of P（High）
It H	Reset Time High	Setting of I（High）
dt H	Reset Time High	Setting of d（High）
SEt2	Set 2	Setting of output2
diF2	Differential Gap2	Hysteresis of output2
SEt3	Set 3	Setting of output3
diF3	Differential Gap3	Hysteresis of output2

■ Setting range of P：0.0~50.0 deg / ﹪。

■ Setting range of I and D：0.00~99.59(0~99min.59sec.)

■ Setting range of differential gap：0.1~2.5 deg / ﹪。

Over temp.display

It will show the error message as below：HHHH ，at the same time，PID output＝OFF。

Under temp.display

It will show the error message as below：LLLL ，at the same time，PID output＝OFF。

ON/OFF of key-lock

We can change the key lock ON/OFF from the normal display by simultaneously pressing the two keys： and for a while。

Auto-tuning

We can change the auto-tuning ON/OFF from the normal display by simultaneously pressing the two keys： and for a while。

PID control display

We can change the setting value/percent of PID output from the normal display by simultaneously pressing the two keys： and for a while。

免责声明

凡本网注明“来源：仪表网”的所有作品，均为浙江兴旺宝明通网络有限公司-仪表网合法拥有版权或有权使用的作品，未经本网授权不得转载、摘编或利用其他方式使用上述作品。已经本网授权使用作品的，应在授权范围内使用，并注明“来源：仪表网”。违反上述声明者，本网将追究其相关法律责任。
本网转载并注明自其他来源（非仪表网）的作品，目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时，必须保留本网注明的作品第一来源，并自负版权等法律责任。
如涉及作品内容、版权等问题，请在作品发表之日起一周内与本网联系，否则视为放弃相关权利。