当前位置：东莞市禧隆电工机械设备有限公司>>>>厂家供应耐磨试验机 UL1581试料磨平机耐磨试验机价格

厂家供应耐磨试验机 UL1581试料磨平机耐磨试验机价格

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质生产商

所在地

在线询价收藏产品

联系方式：叶丽玲查看联系方式

更新时间：2021-07-05 14:44:49浏览次数：148次

联系我时，请告知来自仪表网

产品分类 品牌分类

暂无信息

东莞市禧隆电工机械设备有限公司

经营模式：生产厂家

商铺产品：907条

所在地区：广东东莞市

联系人：叶丽玲（业务）

询价 给他留言

产品简介

XL-8015耐磨试验机UL规格试料磨平机耐磨试验机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度，以供拉力、老化、耐油等试验之用

详细介绍

XL-8015 耐磨试验机 UL规格试料磨平机

耐磨试验机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度，以供拉力、老化、耐油等试验之用。试片台左右、上下及前后可移动，以扳手操作。

符合UL1581标准第420.6条规定。

Buffing machine （AUGUST 2, 2006 - UL 1581）

420.6 A power-driven buffing machine (grinding wheel) is appropriate for buffing irregularities from the ples from which die-cut specimens are to be prepared. The abrasive wheel is to be of about No. 36 grit (particle size of 0.019 inch or 0.486 mm). The wheel is to run true and is not to vibrate. The diameter of the wheel is not specified; however, 4-3/4 – 6-1/4 inch or 0.12 – 0.16 m has been found appropriate. The rotary velocity of the wheel is to be 2500 – 3500 r/min. The diameter and rotary velocity of the wheel are to be selected to give the wheel a peripheral speed (rpm×p×wheel diameter) of 3000 – 5000 ft/min or 15 – 25 m/s. CAUTION – The maximum wheel diameter stated in this paragraph and the maximum wheel rpm stated in this paragraph shall not be used together as this combination will result in a peripheral speed above 5000 ft/min or 25 m/s. This applies even for wheels that are marked as being intended for a peripheral speed above 5000 ft/min or 25 m/s. The machine is to have a slow feed that applies light pressure and removes very little material at one cut, thereby not overheating the specimen or the wheel.

主要技术参数

砂轮：36 ø 5″

砂轮线速度：3000～5000feet/min或15～25m/s

皮带轮加速比：2：1

体积：50×60×40cm

重量：50kg

电源：1∮，AC220V 50Hz

注：以上价格有误，仅供参考，来电更多优惠！

试料磨平机磨出一定厚度的片状，通过冲片机和哑铃刀制出哑铃试片，用于老化试验和拉伸试验。