|
(Please contact us for other wavelengths) |
PILxxx | wavelength (nm) | tolerance (nm) | spectral width (nm) | pulse width (ps) | peak power in collimated beam (mW)(1) | Laser Safety Information | PIL037 | 375 | ± 10 | < 7 | < 60 | > 140 |
| PIL040 | 408 | ± 10 | < 7 | < 45 | > 400 |
| PIL043 | 440 | ± 10 | < 7 | < 60 | > 140 |
| PIL047 | 473 | ± 10 | < 7 | < 60 | > 140 |
| (soon) PIL049 | 488 | ± 10 | < 7 | < 60 | > 140 |
| PIL063 | 635 | ± 10 | < 7 | < 40 | > 150 |
| PIL067 | 670 | ± 10 | < 7 | < 40 | > 300 |
| PIL078 | 780 | ± 15 | < 7 | < 35 | > 300 |
| PIL083 | 830 | ± 15 | < 10 | < 35 | > 300 |
| PIL085 | 850 | ± 15 | < 10 | < 25 | > 100 |
| PIL090 | 905 | ± 15 | < 10 | < 50 | > 400 |
| PIL106 | 1060 | +5/-15 | < 12 | < 40 | > 400 |
| PIL130 | 1300 | +5/-15 | < 13 | < 35 | > 100 |
| PIL155 | 1550 | ± 15 | < 15 | < 25 | > 50 |
| PILxxxDFB | 850, 1310, 1550 | ± 3 | < 0.1 | 30 - 100 | > 20 |
|
|
(1) Higher output on request |
ALS GmbH reserves the right to change specifications without prior notice. |
Optical Head of the Fast PiLas (fixed repetition rate 100 MHz) |
|
- Because of the different resonant structures of DFB / DBR – lasers the optical jitter can be much larger than the typical 4 ps in Fabry-Perot lasers. Please contact us before ordering.
- Other repetition rates between 10 … 110 MHz on request.
- The laser system (head and driver) belongs to laser class 3R shown in the column "Laser Safety Information".
| |
(Please contact us for other wavelengths) |
PILxxxF | wavelength (nm) | tolerance (nm) | spectral width (nm) | pulse width (ps) | peak power (mW) (5) | avg. Power (mW) (6) | Laser Safety Information | PIL040F(4) | 400 | ± 10 | < 7 | < 50 | > 100 | > 0.25 |
| PIL063F | 635 | ± 10 | < 7 | < 45 | > 100 | > 0.5 |
| PIL067F | 670 | ± 10 | < 7 | < 45 | > 100 | > 0.5 |
| PIL078F | 780 | ± 15 | < 7 | < 45 | > 100 | > 0.5 |
| PIL083F | 830 | ± 15 | < 10 | < 45 | > 100 | > 0.4 |
| PIL130F | 1300 | + 5/-15 | < 13 | < 50 | > 50 | > 0.2 |
| PIL155F | 1550 | + 5/-15 | < 15 | < 30 | > 50 | > 0.1 |
| PILxxxDFBF | 850, 1310, 1550 | ± 3 | < 0.1 | 30…100 | > 20 | > 0.05 |
|
|
(4) - only with TEC and fixed repetition rate to 100 MHz - PIL037F, PIL043F PIL047F and PIL049F on request |
(5) typical output power for collimated beam. Higher output power on request |
(6) for higher average power a thermoelectric stabilization is recommended |
ALS GmbH reserves the right to change specifications without prior notice. Dimensions of the optical heads: width x height x depth = 74mm x 38mm x 107mm |