介电强度测试仪-导电性能测定仪 返回列表页

产品名称：【介电强度测试仪】
产品型号：ZJC-50KV、ZJC-100KV
产品品牌：智德创新
控制方式：计算机控制
符合标准：GB/T1408、ASTM D149等
适用材料：橡胶、塑料、薄膜、陶瓷、玻璃、漆膜、树脂、电线电缆、绝缘油等绝缘材料
测试项目：击穿电压测试、介电强度测试、电气强度测试、耐电压击穿强度测试等
试验电压：20KV、50KV、100KV、150KV等
电压精度：≤1%
适用材料：绝缘材料
升压速率：10V/S-5KV/S
试验方式：交流/直流、耐压、击穿、梯度升压
控制系统：PLC控制升压
核心部件：采用进口配件
试验介质：绝缘油、空气
显示方式：曲线显示、数据打印
其它特点：无线蓝牙控制
设备组成：主机、计算机、电极
电极规格：25mm、75mm、6mm
电器容量：5KVA、10KVA
耐压时间：0-8H
安全保护：九级安全保护
质保日期：三年、终身维护。
培训方式：工程师上门培训安装
出据证书：514所、304所、科学研究院等单位均可
主机尺寸：700*800*1300mm、1900*1300*1700mm
主机重量：100KG、200KG
产品类别：电性能检测仪器
物流包装：德邦、木箱
付款方式：全款发货
产品货期：1-3个工作日
一、用途：
ZJC-100KV电压击穿试验仪又称击穿电压测试仪、【介电强度测试仪】、击穿强度测试仪、电气强度测试仪、耐电压强度测试仪、介电击穿强度测试仪、固体绝缘材料电气强度试验机、耐压仪、工频电压击穿试验仪。【介电强度测试仪】由电脑控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在0.1KV-3KV/S，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。【介电强度测试仪】可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。并且能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。
二、符合标准：
1、GB1408.1-2006《绝缘材料电气强度试验方法》
2、GB1408.2-2006《绝缘材料电气强度试验方法 
        第2部分：对应用直流电压试验的附加要求》
3、GB/T1695-2005《硫化橡胶工频击穿电压强度和耐电压的测定方法》
4、ASTM D149《固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验方法》
三、主要技术要求：
1、设备输入电压：交流 100KV (普通试验室电源均可兼容)
2、试验电压方式：交流 0--100 KV ；直流 0--100 KV；
3、电器容量：10KVA;
4、试验方法：0-100KV全量程可调;
5、击穿及耐压试验升压速率：10V/S-5KV/S
6、试验方式： 交/直流试验：1、匀速升压  2、阶梯升压  3、耐压试验
7、过电流保护装置应有足够灵敏度以保证试样击穿时在0.1S内切断电源。
8、漏电电流选择：1—100 mA可由计算机软件自由进行设定。
9、本仪器采用*的无触点原件匀速调压方式，淘汰同类产品中机械传动升压方式。
10、支持短时间内短路试验要求。(其它同类产品无此功能)
11、一次试验可以同时做5个试样。(同类产品一次试验只能做一个试样)
12、电压测量误差：≤ 2％
13、试验电压连续可调：0-100 KV
14、耐压时间设定： 0-6小时(可通过软件连续设定)
15、九级安全防护措施： 
(1) 超压保护
(2)试验过流保护 
(3)试验短路保护
(4)安全门开启保护
(5)软件误操作保护
(6)零电压复位保护
(7)试验结束放电保护
(8)独立保护接地
(9)试验完成后电磁放电
四、试验方式：
1、绝缘试样空气中击穿或耐压试验
2、绝缘试样浸油中击穿或耐压试验
3、绝缘试样空气中阶梯击穿或耐压试验
4、绝缘试样浸油中阶梯击穿或耐压试验
五、试验软件：
1、在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。
2、可以随时调取当前及历史试验数据进行查看，编辑及修改参数。
3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。
5、可设置操作口令，做到专机专人操作，避免无关人员误操作。
六、安全保护功能：
1、试验在试验箱中进行，试验箱门打开时电源加不到高压变压器输入端，即高压侧无电压。100KV测试设备高压电极距离试验箱壁的近距离大于270mm，50KV测试设备高压电极距离试验箱壁的近距离大于250mm，试验时即使人接触箱壁也不会有危险。
2、设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
3、该试验设备的电路设有多项保护措施，主要有：过流保护、过压保护、漏电保护、短路保护、直流试验放电报警，电磁放电等。
4、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注：因为直流试验后不放电会危险到人安全,不能直接拿取电极,起到提醒使用人员放电以免造成伤害)。
5、试验放电装置，电磁铁自动放电放置。
我公司所有产品质保三年，终身维修，请放心购买。

Product Name: voltage breakdown tester
Product model: ZJC-50KV, ZJC-100KV
Product brand: Wisdom innovation
Control mode: computer control
Meet the standard: GB/T1408, ASTM, D149, etc.
Applicable materials: rubber, plastic, film, ceramic, glass, paint film, resin, wire and cable, insulating oil and other insulating materials
Test items: breakdown voltage test, dielectric strength test, electrical strength test, withstanding voltage breakdown strength test, etc.
Test voltage: 20KV, 50KV, 100KV, 150KV and so on
Voltage accuracy: less than 1%
Applicable material: insulating material
Step up rate: 10V/S-5KV/S
Test methods: AC / DC, withstand voltage, breakdown, gradient boost
Control system: PLC control boost
Core components: import accessories
Test medium: insulating oil, air
Display mode: curve display, data printing
Other features: Wireless Bluetooth control
Equipment composition: host computer, electrode
Electrode specifications: 25mm, 75mm, 6mm
Electrical capacity: 5KVA, 10KVA
Pressure time: 0-8H
Safety protection: nine level safety protection
Warranty date: three years, lifetime maintenance.
Training methods: engineers home training installation
Certificate of discharge: 514, 304, scientific research institutes and other units can be issued
Host size: 700*800*1300mm, 1900*1300*1700mm
Host weight: 100KG, 200KG
Product category: electrical performance testing instrument
Packing: wooden box, Debon Logistics
Payment: full delivery
Product delivery: 1-3 working days
One, use:
ZJC-100KV voltage breakdown tester also called breakdown voltage tester, dielectric strength tester, breakdown strength tester, electrical strength tester, dielectric strength tester, dielectric breakdown strength tester, solid insulation tester, dielectric strength tester, voltage breakdown testing instrument. By computer control, data acquisition by means of photoelectric isolation, effectively solve the interference problem in the test process, the software has the advantages of convenient operation, can display the dynamic curve, while the pressure rate can be adjusted, can according to their own needs to boost rate adjustment, adjusted in the range of 0.1KV-3KV/S, so that the pressure rate truly uniform and accurate. And can accuray measure the leakage current data. It can draw the test curve in real time, display the test data, judge accuray, and save, analyze and print the test data. And it can automatically judge the sample breakdown and collect the breakdown voltage data and leakage current, at the same time can in the breakdown instantaneous voltage drops rapidly, automatic zeroing. Software system is easy to operate, stable performance, safe and reliable.
Two, accord with the standard:
1, GB1408.1-2006 "insulation materials electrical strength test method"
2, "GB1408.2-2006 electrical strength of insulating materials test methods
Part second: Additional requirements for tests using direct voltage "
3, GB/T1695-2005 "vulcanized rubber power frequency breakdown voltage strength and resistance voltage determination method"
4. ASTM D149 "test method for dielectric breakdown voltage and dielectric strength at power frequency of solid electrical insulating materials"
Three. Main technical requirements:
1, equipment input voltage: AC 100KV (common laboratory power supply is compatible)
2. Test voltage mode: AC 0--100 KV; DC 0--100 KV;
3, electrical capacity: 10KVA;
4, test method: 0-100KV full range adjustable;
5, breakdown and withstand voltage test step-up rate: 10V/S-5KV/S
6, test mode: AC / DC test: 1, 2, speed boost step-up voltage 3, pressure test
7, overcurrent protection device should be sufficient sensitivity to ensure that the sample breakdown, cut off the power supply in 0.1S.
8 、 leakage current selection: 1 - 100 mA can be set free by computer software.
9, the instrument adopts advanced non-contact original uniform pressure regulation mode, eliminate similar products in the mechanical transmission step-up mode.
10. Support short circuit test requirements in a short time. (other similar products do not have this function)
11, a test can be done at the same time 5 samples. The same product can only be one sample in one test
12, voltage measurement error is less than 2%.
13. The test voltage can be adjusted continuously: 0-100 KV
14 、 voltage setting time: 0-6 hours (can be set continuously by software)
15, nine security measures:
(1) overpressure protection
(2) test overcurrent protection
(3) test short circuit protection
(4) safety door opening protection
(5) software misoperation protection
(6) zero voltage reset protection
(7) discharge protection at the end of the test
(8) independent protective earthing
(9) electromagnetic discharge after completion of the test
Four, test methods:
1. Breakdown or withstand voltage test of insulation sample in air
2, insulation breakdown or compressive specimen immersed in test
3. Step breakdown or withstand voltage test in air of insulating sample
The 4 step, the insulation breakdown or compressive specimen immersed in test
Five. Test software:
1, can boost the breakdown process of drawing curve during the test, each test boost curve are composed of different colors, after testing can be superimposed contrast material testing data repeatability.
2, you can always transfer the current and historical test data for viewing, editing and modifying parameters.
3. The test condition, storage path and automatic storage test results can be modified at any time during the test.
4, in the process of testing, the software can decide whether the test is effective or not, which is convenient for screening test results.
5, you can set the operation password, to do special plane operation, to avoid irrelevant personnel misoperation.
Six, safety protection function:
1. The test is carried out in the test chamber. When the test box door is opened, the power supply can not be added to the input end of the high voltage transformer, namely the high voltage side has no voltage. 100KV test equipment of high voltage electrode distance test box wall distance is greater than 270mm, 50KV test equipment of high voltage electrode distance test box wall nearest distance is greater than 250mm, test