FT-109A压裂支撑剂体积密度测试仪
FT-109AFracturing proppant volume density tester
一.参照标准standard：
参照标准API RP60、Q/SY 124-2007和SY/T 5108-2006压裂支撑剂性能指标及测试方法及QSY 125-2007压裂支撑剂性能制表及评价测试方法制作
Meetthe standard: according to the latest domestic standard API RP60、Q/SY 124-2007 andSY/T 5108-2006 fracturing proppantperformance index and test method recommended and QSY 125-2007 fracturingproppant performance TAB and evaluationtest method
体积密度：单位堆积体积的支撑剂质量称为支撑剂体积密度；单位堆积体积的陶粒质量称为陶粒的体积密度，是包含陶粒本身、开口气孔和闭口气孔三部分的平均密度。单位是g/mL
Volumedensity: The proppant mass of the unit's volume is called the proppant volumedensity;The mass of the ceramsite in the unit’s volume is called the volumedensity of the ceramsite, the average density of three parts of the ceramic grain itself, theopen pore and the closed stomata.Theunit is g/mL
二．参数要求：TechnicalParameters
漏斗上口到桶状容器底板仪器台面总高304.8mm；支撑剂下落点起到一仪器台面的距离215.9mm；
Theheight from the upper opening of funnel to situla floor instrument table is304.8mm, the distance from the proppant drop point to the instrument table is215.9mm.
2.漏斗高76.2mm；漏斗口高12.7mm；桶状容器高76.2mm；仪器台面宽度=30.48mm。
胶皮堵球直径=30.48mm；
Funnelheight 76.2mm, funnel opening height 12.7mm, situla height 76.2mm, instrumenttable width 30.48mm.
Rubberplugging ball diameter30.48mm.
不锈钢支架架直径=4.8mm；桶状容积直径38.1mm；
Stainlesssteel bracket diameter 4.8mm, situla diameter38.1mm.
漏斗顶部外径=139.7mm；漏斗顶部内径=114.3mm；
Funneltop outer diameter 139.7mm, funnel top inner diameter114.3mm.
漏斗和量杯为不锈钢材质.
The funnel and the measuring cup are made ofstainless steel.
配置：毛刷；钢尺；水准仪；说明书；合格证；保修卡；
Equipment:brush, steel, level, manual, certificate, warranty card.
FT-109A压裂支撑剂体积密度测试仪 视频文件链接：
/v_show/id_XMTMyMjgzODc0OA==.html?spm=a2hzp.8253869.0.0
