本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
建材可燃性试验炉是检测仪器，适用于判定建筑材料是否具有可燃性的试验方法。使用前务必仔细阅读说明书。并由 实验人员操作，以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。
The flammability test furnace for building materials is a testing instrument that is suitable for testing methods to determine whether building materials have flammability. Be sure to read the instructions carefully before use. It is operated by experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
建材可燃性试验炉适用标准：
GB8626-2007《建筑材料可燃性试验方法》
GB/T1080L2-2002《热用挤塑聚苯乙烯泡沫塑料（XPS）》
Applicable standards for building material flammability test furnace:
GB8626-2007 "Test method for flammability of building materials"
GB / T1080L2-2002 "Extruded Polystyrene Foam (XPS) for Thermal Insulation"
建材可燃性试验炉技术参数：
★箱体高度700×400×600mm
★试样尺寸250×90mm
★试件A大厚度60mm
★燃烧器喷嘴孔径φ0.17mm
★外型尺寸：700mm×400mm×810mm
Technical parameters of building material flammability test furnace:
Box height 700 × 400 × 600mm
★ Sample size 250 × 90mm
★ Test piece A large thickness 60mm
★ Burner nozzle aperture φ0.17mm
★ External dimensions: 700mm × 400mm × 810mm
建材可燃性试验炉特点：
★该装置的箱体采用不锈钢板（δ1.5mm）弯弯制而成，其造型美观、线条清晰，
★具有耐腐蚀抗老化特点。
★该建筑保温材料燃烧性能检测装置装置中燃烧器配备测量火焰标尺，燃烧器火焰调节方便、灵活、准确。
★试件夹按标准所规定的结构，严格制做，试件装夹，速度快、燃烧效果好
Characteristics of building material flammability test furnace:
★ The box of this device is made of stainless steel plate (δ1.5mm), its shape is beautiful, its lines are clear, and it has the characteristics of corrosion resistance and aging resistance.
★ The burner in this building insulation material combustion performance detection device is equipped with a measuring flame ruler. The burner flame adjustment is convenient, flexible and accurate.
★ The test piece clamp is strictly made according to the structure specified by the standard. The test piece is clamped with fast speed and good combustion effect.
结构及安装：
★结构
该试验仪由燃烧试验箱、燃烧器、试验支架、调节阀等几部分组成。液化气罐自备
★安装
将底座放入箱体内，固定套、试样架等按图示安装好。将燃烧器放在试样前。燃烧器拉杆从箱体外箱体内拧在燃烧器底座上。将表与液化气罐连接上，将调节阀与表的另一端用塑料管连接好，用气动管将调节阀与燃烧器连接起来。
Structure and installation of flammability test furnace for building materials
★ Structure
The tester consists of a combustion test box, a burner, a test support, and a regulating valve. Own LPG (propane) tank
★ Installation
Put the base into the box, install the fixing sleeve, sample holder, etc. as shown in the figure. Place the burner in front of the sample. The burner rod is screwed onto the burner base from the outside of the box. Connect the propane meter to the liquefied gas tank, connect the regulating valve to the other end of the propane meter with a plastic tube, and connect the regulating valve to the burner with a pneumatic tube.
检测装置试验操作：
★选用合适的点火定位器，放在燃烧器顶端。
★试样放在试样夹内，挂上。
★燃烧器接近试样对好位置后，把底板上直尺锁紧定位。
★将滤纸放在铝箔制的收集盘内，放在试件下方。
★将燃烧器立起，打开调压阀旋钮，用电子点火器在喷嘴上点火，逐渐调节火焰长度至20mm左右，将燃烧器倾斜45度，按照标准要求的距离给试样点火
Test operation of building insulation material combustion performance testing device
★ Select a suitable ignition positioner and place it on the top of the burner.
★ Put the sample in the sample holder and hang it up.
★ After the burner approaches the sample alignment position, lock the ruler on the bottom plate to locate it.
★ Put the filter paper in the collection tray made of aluminum foil under the test piece.
★ Stａnd the burner, open the knob of the pressure regulating valve, use the electronic igniter to ignite on the nozzle, gradually adjust the flame length to about 20mm, tilt the burner 45 degrees, and ignite the sample according to the standard distance
