米亚基IS-120B点焊机和广州蓝能电子JYD-10000A点焊机对比
广州蓝能电子科技JYD-10000A点焊机技术参数
Chart1 Technology parameters of resistance welding inverter
Model（型号） | JYD-10000A | JYD-6000Al/AT | ||
Power requirements（V） 输入电压 | 380V AC, 50/60Hz, Three phase | 380V AC, 50/60Hz, Three phase | ||
Control frequency 逆变频率 | 1kHz | 1kHz | ||
Maximum output current 初级大焊接电流 | 300A(Duty factor 10%) | 200A(Duty factor 10%) | ||
Number of schedule 存储焊接规范数 | 20 | 20 | ||
参数规范衰减段 | 9 | 9 | ||
Control method 控制模式 | Primary constant current / Constant power / Constant voltage 定电流、定电压、定功率 | Primary constant current / Constant power / Constant voltage 定电流、定电压、定功率 | ||
Timer 焊接时间 | Mode | ms mode |
| |
SQUEEZE DELAY 预压 |
000-999ms | 000-999ms | ||
SQUEEZE 压下 | 000-999ms | 000-999ms | ||
UP SLOPE 缓升 | 000-999ms | 000-999ms | ||
WELD 1, 2, 3 放电时间 | 000-999ms | 000-999ms | ||
DOWN SLOPE 缓降 | 000-999ms | 000-999ms | ||
COOL 冷却 | 000-999ms | 000-999ms | ||
HOLD 保持 | 000-999ms | 000-999ms | ||
OFF | 000-999ms | 000-999ms | ||
Cooling method 冷却 |
Water cooling 水冷 | |||
Size(mm)(L*B*H) 尺寸 | 460*222*345 | 460*222*345 | ||
Weight(kg) 重量 | 26 | 23 | ||
Corresponding transformer
（变压器）
Power requirements 输入电压 | 380V | 380V |
Model （型号） | JYD-10000A | JYD-6000A |
Rated capacity 额定功率 | 25KVA | 16KVA |
Rated primary voltage 初级输入电压 | 540V | 540V |
No-load secondary voltage 空载电压 | 10V | 9V |
Input frequency 逆变频率 | 1kHz | 1kHz |
Maximum output current 大输出电流 | 10000A | 6000A |
Duty factor 负载 | 10% | 10% |
Cooling method 冷却 | Water cooling 水冷 | Water cooling 水冷 |
Size(mm)(L*B*H) 外形尺寸 | 385*200*300 | 385*200*300 |
Weight(kg)
| 30 | 26 |
米亚基IS-120B点焊机技术参数
DC Inverter Spot Welding /Fusing Power (IS-120B)
Technology Parameter
Chart1 Technology parameters of resistance welding inverter
Model | IS-120B | ||
Power requirements（V） | 220/240/380/400/440/480VAC +10% -15%, 50/60Hz, Three phase | ||
Control frequency | 1kHz, 800Hz, 600Hz Switchable | ||
Maximum output current | 200A (Duty factor 8%) | ||
Number of schedule | 15 | ||
Control method | Primary constant current peak value / Primary constant current effective value | ||
Timer | Mode | ms mode | |
SQUEEZE DELAY | 0000 to 9999ms | ||
SQUEEZE | 0000 to 9999ms | ||
UP SLOPE | 000 to 400ms | ||
WELD 1, 2, | 000 to 600ms | ||
DOWN SLOPE | 000 to 400ms | ||
COOL | 000 to 999ms | ||
HOLD | 000-999ms | ||
OFF | 0000 to 9990ms (10ms each) | ||
Cooling method |
| Water cooling | |
Size(mm)(L*B*H) |
|
| |
Weight(kg) |
| 15 | |
Corresponding transformer
Power requirements | 440VAC |
Model | ITH-651B6W |
Rated capacity | 26.8kVA |
Rated primary voltage | 600V |
No-load secondary voltage | 9.3V |
Input frequency | 1kHz |
Maximum output current | 7000A |
Duty factor | 8.5% |
Cooling method | Water cooling |
Size(mm)(L*B*H) | 168W x 398D x 199H mm / 16kg |
Weight(kg) | 16 |
现在已经有非常多的客户选择我司中频逆变JYD-10000A点焊机代替米亚机IS-120B中频点焊机，已经证明了我司JYD-10000A点焊机性能完*满足客户的需求。
