标准 USB2000+UV-VIS and USB2000+VIS-NIR Miniature Fiber

The USB2000+ Series of Spectrometers from Ocean Optics feature an amazingly small footprint, plug-and-play capabilities and a simplified interface that operates without external power.

Simply plug your USB2000+UV-VIS or VIS-NIR into an available USB port on your computer and you eliminate the need for analog converters.

Your spectrometer comes preconfigured to the 200-850 nm wavelength range for USB2000+UV-VIS or 350-1100 nm for the USB2000+VIS-NIR. Both models include a proprietary multi-bandpass order sorting filter. Our USB2000+UV-VIS also features a UV2 detector coating upgrade.

Our ES (Enhanced Sensitivity) models feature an installed detector collection lens for increased light collection efficiency.

.

USB2000+
UV-VIS

USB2000+
VIS-NIR

USB2000+
UV-VIS-ES

USB2000+
VIS-NIR-ES

Computer Interface:

-- Universal Serial Bus (RS-232 available on side connector) --

Spectrometer channels:

-- Master spectrometer channel only --

Detector:

-- 2048-element linear silicon CCD array --

Integration time:

-- 1 ms - 65 seconds --

Useable range:

200-850 nm (grating-dependent)

350-1000 nm (grating-dependent)

200-850 nm (grating-dependent)

350-1000 nm (grating-dependent)

Dynamic range:
 

-- 8.5 x 10⁷ (system); 1300:1 (single acquisition) --

Sensitivity:

-- 75 photons/count; also, 2.9 x 10^-17 joule/count --

-- 2.9 x 10^-17 watts/count (for 1-second integration)  --

Signal-to-noise ratio:

-- 250:1 (at full signal) --

Dark noise:

-- 50 (RMS) --

Grating:

600 lines/mm, set to 200-850 nm (blazed at 300 nm)

600 lines/mm, set to 350-1000 nm (blazed at 500 nm)

600 lines/mm, set to 200-850 nm (blazed at 300 nm)

600 lines/mm, set to 350-1000 nm (blazed at 500 nm)

Slit:

-- 25 μm width (height is 1mm) --

Detector collection lens:

No

No

Yes

Yes

Focal length:

-- 42 mm (input); 68 mm (output) --

Order-sorting:

Single-piece, multi-bandpass detector coating to eliminate second-order effects from 200-850 nm

Single-piece, multi-bandpass detector coating to eliminate second-order effects from 350-1000 nm

Single-piece, multi-bandpass detector coating to eliminate second-order effects from 200-850 nm

Single-piece, multi-bandpass detector coating to eliminate second-order effects from 350-1000 nm

Resolution:

-- 1.5 nm (FWHM) --

Stray light:

< 0.05% at 600 nm
< 0.10% at 435 nm
< 0.10% at 250 nm

< 0.05% at 600 nm
< 0.10% at 435 nm

< 0.05% at 600 nm
< 0.10% at 435 nm
< 0.10% at 250 nm

< 0.05% at 600 nm
< 0.10% at 435 nm

Fiber optic connector:

-- SMA 905 to single-strand optical fiber (0.22 NA) --