KSD314-T 35A大电流断电复位温控器/保护器 温控开关 返回列表页

产品介绍

KSD314系列突跳式温控器（碟片直径3/4英寸）是带外壳的双金属片温控器，工作于阻性负载下。其负载能力高，大额定电流为35A。适合用于大功率的电器中作温度控制或过热保护之用。

L：* Long term

S：小于15分钟 Less than 15 min

安装与使用

使用中2安装与使用说明：
1．接地方式：通过温控器金属外盖与设备接地金属部件相连

Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.

2．温控器应工作于空气相对湿度不大于90%、无腐蚀性气、可燃性气体和导电尘埃存在的一般室内环境。

The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.

3．温控器采用接触感温时，应使其封盖紧贴被控器具的发热部位，并应在封盖感温表面涂上导热硅脂或其他性能类似的导热介质。

When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover’s surface.

4．温控器通过接触液体或蒸汽感温时，建议采用不锈钢封盖的产品，并应有可靠的防漏措施，以免液体渗到温控器绝缘部件上。

If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat’s insulation parts.

5．不可把封盖顶部压塌或使其变形，以免动作温度改变或影响其他性能。

The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat’s temperature sensitivity or its other functions.

6．不得让液体渗入温控器内部！壳体必须避免受到过大的力以防止出现裂纹；壳体应保持清洁，防止导电物质污染，以免因绝缘性能降低而发生短路击穿。

Liquids must be kept out of the thermostat’s inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.

7．使用过程不能折弯接线端子，否则将影响电气连接的可靠性。

The terminals should be bent, or else, the reliability of electric connection will be influenced. cracking base, distorted terminal and wire lead coming off.