MS系列磁力冷却液分离器 日本KANETEC强力牌

磁力冷却液分离器  型号：

MS- 2FC、MS- 4FC、MS- 6FC、MS- 8FC、MS-12FC、MS-18FC、MS-24FC、MS- 2FCH、MS- 4FCH、MS- 6FCH、MS- 8FCH、MS-12FCH、MS-18FCH、MS-24FCH、MS-2FCHP、MS-4FCHP、MS-6FCHP、MS-8FCHP、MS-12FCHP、MS-18FCHP、MS-24FCHP

磁力冷却液分离器  别名：

磁力冷却液分离器、铁屑分离器

磁力冷却液分离器  用途：

把本装置组装在磨床的磨削液净化循环系统内，以除去铁粉，这是净化作用中的一个主要环节。

同时使用通过浮游和沉淀进行比重分离的罐，就能分离铁粉以外的砂轮粉等，可使清净再生的磨削液再次供应给磨床。

磁力冷却液分离器  特点：

●磁筒的磁铁是固定的，在结构上是外周的筒壳旋转，刮板部 没有磁铁，因此能把油泥顺利排出。（也提高了刮板寿命）

●改变了磁筒的旋转驱动结构，大幅度提高了耐用性。

●重新设计了压辊的张力结构，从而获得了较高的挤压性能。

●压辊部和流入部添加了盖，从而提高了安全性和防止磨削 液的四溅。

●流出口可选择左右和下面，可灵活地应对循环系统设计的 变更。

●高磁力型（MS-FCH：筒表面最大磁通密度0.3T（ 3000G ））以及超高磁力型（ MS-FCHP ： 0.5T（5000G））最适宜 用来回收弱磁性油泥和微细油泥。

●可制作电动机安装在右边（MS-F-R）的型号的。

MAGCLEAN MAGNETIC COOLANT SEPARATOR KANETEC

MS-4FC
(SERTEC motor）

[Application]

This is unti is incorporated in the coolant purification and circulation system for grinders to remove iron particles, a major part of purification.
When it is used together with a tank in which particles other than iron powder such as abrasive grains are separated by floating and precipitation, re-precioitation, repurified and regenerated coolant can be supplied to grinders agein.

[Features]

• The construction of a stationary magnet and a rotary outer drum shell has no magnet in the area of the rake plate and allows smooth discharge of sludge.(The life of the rake plate is also prolondged.)

• The magnetic drum rotation drive construction has been modified to improve surability significantly.

• The squeezing roller tensioning mechanism has been designed anew to improve the squeezing performance.

• The squeezing roller and inlet are convered to enhance asfety as well as to pervent grinding coolant from splashing/scattering.

• The outlet can be located on the right,left or bottom thanks to a good criculation system layout.

• The high magnetic force MAGCLEAN (MS-FH・MS-FHP:rare earth magnet) works effociently for collecting weak magnetic sludge and minute slude.

• A Type having a motor on the right side(MS-F-R) is also available.

MS-FC/FCH/FCHP

MS-FC-R

Sludge box:MS-2F*/4F*/6F*

Model	Dimensions (mm)
	L	W	H
MS-2F*	193	148	82
MS-4F*	267	165	95
MS-6F*

Sludge box:MS-8F*/12F*/18F*/24F*

Model	Dimensions (mm)
	L	W	H
MS-8F*	308	170	210
MS-12F*	410	230
MS-18F*	460
MS-24F*	510

Optional components to support MS-F installation

Inflow BoxHeight-adjustable parts

Model			Dimensions (mm)
Standard Type	High magnetic force type	Super High magnetic force type	h	L	H
MS-2FC	MS-2FCH	MS-2FCHP	105	110	105
MS-4FC	MS-4FCH	MS-4FCHP		130
MS-6FC	MS-6FCH	MS-6FCHP		150
MS-8FC	MS-8FCH	MS-8FCHP	155	170	115
MS-12FC	MS-12FCH	MS-12FCHP		190