DTA-110T Features
· OFDM modulator with support for DVB-T and DVB-H (EN 300 744)
· Low cost, low power and flexibility achieved by performing part of the modulation process in software
· Integrated UHF Upconverter with on-board 400…862-MHz synthesiser
· RF output can be connected directly to a digital terrestrial receiver
· Programming interface (DTAPI) compatible with other DekTec digital-video output adapters
· With DtLoop: modulator replacement
· PCI rev 2.2, 32 bit, 33 or 66 MHz bus
DTA-110T Applications
· Driving digital terrestrial receivers for demos, at shows, in electronics stores
· Set-top-box development, repair, production testing, performance testing
· Signal validation: check out whether receivers can handle a new transport stream
· Output adapter for generating an OFDM modulated RF signal directly from your custom application
PC Requirements
· PC selection is critical because of software processing. The DTA-110T will not operate well in PCs that lack sufficient CPU power, memory- or PCI bandwidth
· P4@2GHz minimum, or equivalent AMD
· 512 MB RAM minimum
· Windows-2000/XP/2003, no Linux support
· Motherboard chipset should not use integrated graphics, e.g. Intel 82865G does NOT work
DTA-110T Key Attributes
Modulation EN 300 744 (DVB-T)
Bandwidth 5/6/7/8 MHz
Modulation QPSK, 16/64 QAM
Transmission Mode 2k, 4k, 8k
Convoultional Rate 1/2, 2/3, 3/4, 5/6, 7/8
Guard Interval 1/4, 1/8, 1/16, 1/32
RF Connector 75Ω F-Connector (2x)
RF Frequency Range 400 ... 862 MHz
RF Frequency Accuracy < ± 1 ppm
RF Step Size 100 kHz
Output Level -25 ± 1 dBm
Spurious Suppression > 50 dB (d2: 20 dB)
Return Loss > 20 dB
PCI rev 2.2 compliancy 32 bit, 33/66 MHzUniversal 3V/5V | 深圳市鑫成通电子有限公司优价提供DTA-110T-SP 调制卡，DekTec DTA-110T-SP DVB-T(COFDM)调制卡DTA-115-SP DTA-100-SP DTA-102-SP
DTA-105-SP DTA-107-SP DTA-107S2-SP
DTA-110T-SP DTA-110-SP DTA-110T-ISDB-SP
| | |
