上海百雒精密仪器有限公司
上海百雒精密仪器有限公司
DIW-120日本CEDAR思达数显扭力扳手
| Screw tightening control |
| ● DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
| (1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
| ＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode (selectable) ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output(USB) ＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included. |
NEW DEVELOPMENT Wrench head awivels 300° |
| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
| Measuring range N・m (at the time of Track) | 0.20 - 15 N･m | 0.20 - 20 N･m | 0.20 - 75 N・m | 2.0 - 120 N・m | |
| 2.0～150 kgf・cm | 2.0～200 kgf・cm | 2.0～750 kgf・cm | 20～1200 kgf・cm | ||
| 2.0～130 lbf・in | 2.0～180 lbf・in | 2.0～650 lbf・in | 20～1040 lbf・in | ||
| Accuracy | ±0.5% (F/S) (199 or less digit±1digit) | ±0.5% (F/S) (499 or less digit±3digit) | ±0.5% (F/S) (199 or less digit±1digit） | ||
| Display | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW (rightleft) | ||||
| Measuring mode | P-P Peak | Holding Peak Load Value | |||
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
| C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | |||
| Data memory | 800 data / ten channels data | ||||
| A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||||
| Auto power save | 10 minutes no use, automatically switch off. | ||||
| Charging time | From empty - less than 5hours | ||||
| Continunous working time | 12 hours | ||||
| Outside size | φ34(grip)×236(L) | φ34(grip)×235(L) | φ34(grip)×320(L) | φ34(grip)×445(L) | |
| Weight (about) | 430g | 470g | 620g | 830g | |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
| Attachment | - | One-way socket | |||
| Accessories (one piece each) | AC/DC adaptor | ||||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
仪表网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
